Beer engine with corny setup questions

[MCRBrew]

What thread size are sparklers?

Possibly 5/8 26 TPI? Specced here:

https://rlbs.ltd.uk/short-nozzle-extension.html

Found via this thread:

https://www.homebrewtalk.com/threads/beer-engine-sparkler-thread-match.642641/

 

[MashBag]

thanks & again for the link. Seems some one might be ahead of me....Will have a good read.

 

[RoomWithABrew]

Has anyone thought about using a hand water pump...

View attachment 104406

I think the answer is yes. Earliest reference I can see is 1997, but can't access the link in BYO.

But this link has the same tech.

https://beerandbrewing.com/diy-beer-engine/

 

[Wigglebutts Brewery]

I love my Angram! I looked at the DIY but for all the effort go with the real deal. UKBay prices are incredible but US shipping almost doubles cost. I’d love to have a double. The poor man’s regulator (propane) is all that’s needed. I naturally carbonate with 1.5 oz dextrose. I bought another that needed TLC for fun and a portable option.

 

[MashBag]

I think the answer is yes. Earliest reference I can see is 1997, but can't access the link in BYO.

But this link has the same tech.

https://beerandbrewing.com/diy-beer-engine/

I fancy a simple and highly portable jobby.

Wooden wine box.
Containing 2x 5l bag in box and the pump.
In use: box standing on end, pump attached ready to serve. Micro bar.

 

[RoomWithABrew]

I fancy a simple and highly portable jobby.

Wooden wine box.
Containing 2x 5l bag in box and the pump.
In use: box standing on end, pump attached ready to serve. Micro bar.

Go for it. With room to throw a few ice packs in to keep the cellar temps.

 

[MashBag]

Does anyone know if there is a duotight or JG fitting to connect 8mm push fit hose to 5/8 male?

 

[RoomWithABrew]

Why?

 

[Buffers brewery]

Does anyone know if there is a duotight or JG fitting to connect 8mm push fit hose to 5/8 male?

https://ikegger.co.uk/products/duo-tight-8mm-push-fittings?variant=20717947682919

 

[MashBag]

@RoomWithABrew I need a bit of gas hose with a 5/8 male thread on the end

 

[MashBag]

https://ikegger.co.uk/products/duo-tight-8mm-push-fittings?variant=20717947682919

Nearly I was hoping to get threaded bit on the push fit?

 

[MCRBrew]

If this is to fit a sparkler, I think that a 5/8 shank on a beer tap is BSP (14 TPI) and if the reference I previously posted is correct the sparkler is 5/8 26 TPI. Don't think you'll get a Duotight or JG fitting at this pitch.... happy to be proved wrong though!

I wonder if you could do something with the extension that RLBS sell and some epoxy?

 

[peebee]

Gas hose? 5/8 inch male (thread, what thread)? 8mm pushfit?

This is adding up to something potentially very scary. No wonder @RoomWithABrew asked "Why?".


Ah, @MCRBrew has a less pessimistic idea of what's being attempted! Still (a person like me has undying pessimism) there's no mention of gas in his reply. @MashBag; explain.

 

[MashBag]

If this is to fit a sparkler, I think that a 5/8 shank on a beer tap is BSP (14 TPI) and if the reference I previously posted is correct the sparkler is 5/8 26 TPI. Don't think you'll get a Duotight or JG fitting at this pitch.... happy to be proved wrong though!

I wonder if you could do something with the extension that RLBS sell and some epoxy?

Yeah 5/8 26 TPI hose tail was my next thought.

 

[MashBag]

Gas hose? 5/8 inch male (thread, what thread)? 8mm pushfit?

This is adding up to something potentially very scary. No wonder @RoomWithABrew asked "Why?".


Ah, @MCRBrew has a less pessimistic idea of what's being attempted! Still (a person like me has undying pessimism) there's no mention of gas in his reply. @MashBag; explain.

8mm hose fits beautifully into a party tap.
Add to that a sparkler and all I need to do is estimate the pressure excerted by a hand pump....

 

[peebee]

8mm hose fits beautifully into a party tap. ...

Then don't mention "gas hose"! Your focus does jump about a bit and we could imagine some "alternative" horrific scenarios from what you were asking.