Blow off tube.

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ale_crowe_holic

Active Member
Joined
Sep 6, 2023
Messages
87
Reaction score
138
Location
North wales
Sorry if this has been discussed before. My fridge doesn't allow for a traditional airlock so I've used a bit of tube going to some boiled and cooled water in a sterilised bottle.

Is the tube too long? Should it be a sealed connection to the bottle?

It looks like some of the foam has travelled down into the bottle looking at the colour of the water.

Cheers.

20240827_222030.jpg
 
It's fine, you have had a blow off which is what it is designed for, you don't need a seal on the bottle.
The tube length is fine just so long as it stays in the water.
I use a blow off tube usually and had one blow off like this, no infection can climb up the tube.
 
Brilliant, cheers..
I've done it like this before but I've seen someone say it needs to be sealed and thought I'd check 😅
It's bubbling away quite nicely on its first full day of fermentation.
 
Too much water in the bottle, half fill it and put the tube to the bottom this will allow any foam to collect in the bottle rather then make a mess of the fridge.
 
Back
Top