- Joined
- Aug 12, 2015
- Messages
- 10,732
- Reaction score
- 10,662
Do you need solar for agile?Yep. I got the email. But leccy (on agile) is essentially free for most of the morning so we're queuing up everything to run tomorrow morning
Do you need solar for agile?Yep. I got the email. But leccy (on agile) is essentially free for most of the morning so we're queuing up everything to run tomorrow morning
Nope.Do you need solar for agile?
It is going to be free for me anyway because this is the time when I generate on solar...Free electric tomorrow between 13-14hours
"Feed in tariff" is the old (no longer subscribable) tariff were you got paid for what you generate, not necessarily what your export.Also agile is not compatible with some of their feed in tariffs if you have solar.
I've just switched from economy7 to cozy octopus, as even with 10kwh battery, low light levels in the winter & HVAC heat pump running can use it all up by 4pm.
Cozy let's you top up in the afternoon as well.
Its not as cheap as agile, but then with agile you would be constantly changing your charging pattern. And it is compatible with their fixed solar feed in tariff.
What rate do you sell? Because, based on your link, it looks like I will be selling for around 7-9 pence kWh on Agile , while I sell for 13.13 p/kWh on Flux at the moment before 16:00 and 26.21 p/kWh between 16:00 and 19:00Tomorrow is an abnormal day, but it's essentially free for many hours.
View attachment 105017
You can use https://agile.octopushome.net/dashboard
To make up your own mind based on how much it fluctuates
Same here, but I can fill the battery for extra freeness. And put the washer/dryer/oven/fan heater onIt is going to be free for me anyway because this is the time when I generate solar power post...
Just replied, but we export at 15p/kWh now. Over the winter we're a net importer, so go for the cheap import rate. We are exporting not a lot in October, and very little between 4-7pm given we need the battery capacity to cover the rest of the day.What rate do you sell? Because, based on your link, it looks like I will be selling for around 7-9 pence kWh, while I sell for 13.13 p/kWh on Flux at the moment before 16:00 and 26.21 p/kWh between 16:00 and 19:00
I wonder if it worth doing it for the winter period when my solar power generation falls by up to 10 times (December vs June)
Thanks never seen that’s we’ve got fixed and fixed.
Yeah, I can see that I cannot combine with Flux… will still call Octopus to get their estimates. Is there a standing charge on Agile or it gets the standing charge from another tariff?
All import tariffs have the same standing charge (I think).Is there a standing charge on Agile or it gets the standing charge from another tariff?
When we had our DNO done, we're restricted to 3.35kW export.Its all a bit academic.
When you had your panels installed, the DNO should have signed off on your maximum allowed export rate.
You are not supposed to go above that unless you get them (DNO) round again to check you can export more to the local grid without frying the wires.
I don't know what the standard domestic supply can take. It usually depends on the diameter of the wires going into your house, but the local grid will not necessarily be designed for every house in your street to be pulling the full load at the same time.
For example the 1969/70 estate I am on may have been built on the cheap, but all the houses originally had economy 7 electric storage heaters, so the main supply is designed to take a high domestic load.
But in other locations were the cooking & heating are gas, the grid connections may not be as robust.
Well, I put as many panels as I could on my roof. Then I told my neighbours and they decided to go with the same solar panel installers because they have excellent reputation for DNO not being rejected. My DNO was accepted and theirs rejected... Now they blame me for generating electricity for the whole estate :)When we had our DNO done, we're restricted to 3.35kW export.
I don't quite understand how us exporting more than that will fry the local wiring, given that we can comfortable import 3 times that amount, and it's not like electricity cables work differently one way around than another. And that's just our one house, we have close neighbours, so presumably the local street cables can handle a LOT more than 3.35kW . But at the end of the day, that's all we can export so that's what we're stuck with
I don't think you can do bi-directional charging with anything but a Cybertruck.Does anyone know how much electricity can Tesla 3 discharge per hour? Just toying with some calculations - my Powerwall can discharge from 100% to the grid within 3 hours (during peak time), wonder if adding Tesla 3 will allow discharging more. I read that the battery is the limiting parameter. However, since you can drive Tesla circa 300 miles, and it’s capacity is circa 50 kWh, while PowerWall 2 is 13.5, Tesla 3 is about 4 times larger. And since Tesla 3 can be bought for £13k (if you are lucky), while Powerwall costs £9-10k, it might be better deal buying a car to use as a battery …
I don't think you can power the house with Leaf though... It will require modifications that may invalidate some warranties...I don't think you can do bi-directional charging with anything but a Cybertruck.
Few cars can do true bi-directional and the chargers are extortionate
https://zecar.com/resources/which-electric-cars-have-bidirectional-charging
In addition, there are currently no chargers on the market. Indira were doing a trial, but that's finished. Quasar did some, but they were Chademo only and they say they're currently developing a CCS one.
Ignore anything that's V2L. That's effectively a 3 pin plug that does 15 amps.
The only ones that do V2H are the VW ID3/4, the Cupra Born (same car), Kia EV9 (brand new and lots of $$$s and the Nissan Leaf (post 2013).
Gives you the loads on the link above. Around 11kw.
The Leaf is the one to go for. They can be picked up quite cheaply. There's a 5 year old, 62kWh high miler on Autotrader for £7,450, for instance.
Enter your email address to join: