dtashmore
Active Member
I have managed to fit an ispindel inside a rapt pill housing, In south Africa the ispindel housing is difficult to get whilst the rapt pill is easy, I purchased 5 cherry Phillips v3.2 boards and reshaped them, just got enough off either side to fit them in the housing without damaging any tracks although it is a fairly tight fit with the battery in a housing.
I also made two additions to the build and used the gravitymon software. first mod was to fit wireless charging as it it's problematic to open and close the container due to the o rings although these are good and make the unit a good pressure tight device they are difficult to open and close even when lubricated. the other mod is a magnetic reset to avoid having to Open for calibration and maintenance.
one side of the pcb had more removed than the other owing to the presence of tracks.
I also made two additions to the build and used the gravitymon software. first mod was to fit wireless charging as it it's problematic to open and close the container due to the o rings although these are good and make the unit a good pressure tight device they are difficult to open and close even when lubricated. the other mod is a magnetic reset to avoid having to Open for calibration and maintenance.
one side of the pcb had more removed than the other owing to the presence of tracks.