Homebrew has defeated me :(

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I started using a thermostatic hest pad recently. I quickly learned that ensuring the temperature sensor is securely attached to the side of the FV is vital. To this end, I have put a piece of plastic packaging (bubble wrap would also do) over the sensor to get good, tight contact with FV before securing with the belt. I leave it for 30 mins to stabilise then switch on. Set the temp to 22. Once the display indicates 22, check the temp of you wort with a thermometer to give an indication of how accurate your sensor is. Adjust setting on heat pad if necessary. I also secure the sensor to the FV with sellotape as if it slips out your heat pad will switch on depending on the temperature of the room rather than your beer. Another handy rule of thumb is 2+2+2. 2 weeks to ferment, 2 weeks to carbonate, 2 weeks to condition. Patience is your best friend.
 
Is the OP having a laugh? He's been asked for the recipe and details of his procedure.
Neither forthcoming as far as I can see. There's something on another thread referring to MJ IPA kit, I think.
It's hardly coherent.
Honestly, it's like getting blood from a stone!
 
Can you remember what size yeast packet came with your kits?

Many years ago there was a whole load of threads on here about the infamous "1020 stuck brews", it was often concluded that it was due to the small 6g yeast packets coming with kits. Some kit manufacturers increased the yeast to 12g to prevent this, but many kits stuck with 6g: those are the ones that tend to stick at 1020, you really need 12g of yeast with a 23L brew.

Try another kit and, if it comes with a 6g yeast packet, substitute it for a 12g one. Yeasts such as S-04 or US-05 for hoppy kits will do, and are very reliable yeasts. And keep it warm enough as others have said.
 
I think this is a simple yeast issue. Complicated explanations, like water etc., don't ring true. It's not complicated to get kits to ferment out in most circumstances. Some of these kits have small packets of yeast that are better suited to fermenting a kilo of sugar + the kit, and it seems he is using male extract. Either that or the hydrometer is not being read correctly. When people report very low OGs for kits I do wonder. Hydrometers can be bit confusing at first.
 
I think this is a simple yeast issue. Complicated explanations, like water etc., don't ring true. It's not complicated to get kits to ferment out in most circumstances. Some of these kits have small packets of yeast that are better suited to fermenting a kilo of sugar + the kit, and it seems he is using male extract. Either that or the hydrometer is not being read correctly. When people report very low OGs for kits I do wonder. Hydrometers can be bit confusing at first.
Very hard to find out how much yeast comes with those kits. I found another thread from 2021 about that exact kit and back then it was 5g according to the OP. Same problem encountered although FG was a bit lower.
 
Do we know if he added the obligatory kilo (or however much it may be for the specific kit) of sugar before fermenting?

It may well be a silly question, but looking through the thread so far, it hasn't been explicitly stated at any point other than an implication covered by the statement "followed the instructions".

An OG of 1030 sounds more like only the malt was added, at least to my (admittedly, still rather green to beer brewing) mind.
 
It may well be a silly question, but looking through the thread so far, it hasn't been explicitly stated at any point other than an implication covered by the statement "followed the instructions".

Very good question.
The details are missing.
But this is why it is beginning to sounds like a windup.

Tbh of our is a windup it is working 👍 full marks!

Here's a thought... 2 threads... Is it a bet with his mates as to how many replies he can get 🤣🤣
 
Do we know if he added the obligatory kilo (or however much it may be for the specific kit) of sugar before fermenting?

It may well be a silly question, but looking through the thread so far, it hasn't been explicitly stated at any point other than an implication covered by the statement "followed the instructions".

An OG of 1030 sounds more like only the malt was added, at least to my (admittedly, still rather green to beer brewing) mind.
Apparently he did. It's on the other thread he started.

It was a Mangrove Jacks Brewers Series 40 Pint Pale Ale and recommended using Mangrove Jacks 1.5kg Pure Liquid Malt Extract - Light or sugar. I went for the extract.
 

Latest posts

Back
Top