Hazelwood’s Brewday Part 2

[Hazelwood Brewery]

After a weekend in Norfolk with family and a friends birthday party I needed to keg the latest batch of Pirate Pale today.

While syphoning the beer into the keg I took a sample as usual and the clarity immediately grabbed my attention because this beer is usually very clear out of the fermenter and this batch is a little hazy.

A quick sniff confirmed this isn’t right at all and a taste was the final confirmation, far more malty that it should be and the bright hoppiness I expect from this beer was missing. Then I became aware there was no hop debris in the fermenter - I’d completely forgotten to dry hop the beer before we went away, probably distracted thinking about the weekend!

What to do? The beer tastes OK but isn’t the beer I was looking forward to having at Christmas. Decision made.

I filled the keg to the rim to minimise any waste, washed up the fermenting bucket and transferred the beer back into the bucket, then added the dry hops along with a little ascorbic acid. To further minimise oxidation I fed CO2 into the head space for a minute or so and fitted the bubble trap. Fingers crossed

That can sit in secondary now for 2 of 3 days and I’ll have another go at kegging it.

 

[Clint]

I'm sure it'll be fine H!

 

[Hazelwood Brewery]

I didn’t realise but it’s been three months since I last posted in this thread . I did keg the Pirate Pale in the last post and the beer was fine.

On Friday I brewed my first beer of the year (and since the Pirate Pale above), a batch of my Best Bitter. This will be my cask version so my boiler is pretty full because the King Keg is 23 litres and I don’t want too big a head space or the beer might oxidise.

I will also brew a batch of Best Bitter to go into a corny sometime in the next few days.

 

[Twostage]

I didn’t realise but it’s been three months since I last posted in this thread . I did keg the Pirate Pale in the last post and the beer was fine.

On Friday I brewed my first beer of the year (and since the Pirate Pale above), a batch of my Best Bitter. This will be my cask version so my boiler is pretty full because the King Keg is 23 litres and I don’t want too big a head space or the beer might oxidise.

View attachment 108741

I will also brew a batch of Best Bitter to go into a corny sometime in the next few days.

Seeing the picture of your cygnet makes me think wistfully of mine gathering dust now I've switched to a Brewzilla. Wondering about a double brew day - either sequential using the cygnet to get the second batches water upto mash temp while batch one boils or parallel with full cycle in each but I've moved away from BIAB. Is there such a thing as a malt pipe for a cygnet ?

 

[Hazelwood Brewery]

Is there such a thing as a malt pipe for a cygnet ?

I use a large hop spider, it pretty much fills the boiler with a 1cm gap all round. It holds about 5.5Kg of grain which is enough for most brews going in a corny keg.

 

[Twostage]

I use a large hop spider, it pretty much fills the boiler with a 1cm gap all round. It holds about 5.5Kg of grain which is enough for most brews going in a corny keg.

 

[Twostage]

Where did you get it from ? I can see one at TMM but its only 20cm diameter.

 

[Appleton Brews]

I’ve got one of these to use with a Burco Cygnet boiler. Grain basket not a spider.

 

[Hazelwood Brewery]

View attachment 108801
I’ve got one of these to use with a Burco Cygnet boiler. Grain basket not a spider.

That’s it. Hop spider / grain basket - depends on the sellers description but this is the right size. I think mine cost about £80 but I’ve seen them lower cost and higher.