Counterflow chiller build.

[GerritT]

You may find the little nozzle thingy on your tap unscrews.... failing that the plastic screw on hosepipe fittings are great..I have one..couple of quid from Wilko.

Yes and it leaves a hole I can do nothing with

 

[Clint]

That may be a female tap thread adapter...

 

[GerritT]

That may be a female tap thread adapter...

With very little thread and depth. So I prefer the non-intrusive over-clamp way of doing things. When I screw up, nothing of value will be lost.

 

[Dutto]

You may find the little nozzle thingy on your tap unscrews..........

There's nowt worse than some Smart Alec pointing out that you didn't need the gizmo that just cost you an arm and a leg to buy, because the original bit of kit can be unscrewed!

 

[Sbond10]

Yep my sprinkler unscrews on my kitchien tap but the thread is unmatchable to any product ive found.
So as i have a downstairs bathroom i simply unscrew the shower hose and screw on a quick disconnect onto this. Cheap n easy solution.

 

[Clint]

Just useless info Dutto....not unless Sbond10/GerriT CAN find something to fit...I'm sure this sprang to mind as I obviously remember it for this reason...fitting a hose pipe....
What mm size is the hole after removing the nozzle? Just had a Google/ eBay....these adapters are available,with or without hoselock fitting. Just need to see if the thread size is right or look for a reducer to fit.

 

[GerritT]

No thread needed: just a clamp and some healthy tightening!

 

[Sbond10]

Excellent glad it works now go build a cfc

 

[AlanHarper]

Or better like this one...