Built the first beer crate

[fireworkmaster]

It's as rough as a badgers behind but it'll do.
Made from reclaimed timber from an old bed base.
Need to make at least 3 more , need to figure out a way to make next one stack securely lol.

 

[The Baron]

Looks good to me mate.
Need a small inner lip on the base to lock inside the top edge should do it

 

[fireworkmaster]

Looks good to me mate.
Need a small inner lip on the base to lock inside the top edge should do it

Cheers , yeh was thinking that , will need to raid the scrap material pile, but pretty sure I don't have anything thin enough , jigsaw to the rescue me thinks.

 

[Buffers brewery]

Nicely done I’d suggest moving the vertical slats at the four corners up a bit 10-20mm (1/2” - 1”). Should interlock if my brain is right

 

[The Baron]

I think that would work also Buffers

 

[An Ankoù]

Provided the bottles don't stick up beyond the top of the crate, they'll stack very nicely without any mods at all.

 

[fireworkmaster]

Provided the bottles don't stick up beyond the top of the crate, they'll stack very nicely without any mods at all.

Bottles are 27cm crate it 28 high .

 

[fireworkmaster]

Nicely done I’d suggest moving the vertical slats at the four corners up a bit 10-20mm (1/2” - 1”). Should interlock if my brain is right

Thinking the next one's will alternate moving the end slats in and protruding up and down by say 20mm that way they would lock together.