Morning all, just a quick question, so i'm going to do my first brew for probably 10 years, and my intention was to pressure ferment in a chubby fermenter. I wont be drinking this until mid December - my question is do i need to transfer from the fermenter - or can i leave it in there and server from there after this amount of time?
Serving from fermenter
- Thread starter Collo
- Start date
Help Support The Homebrew Forum:
- Joined
- Nov 13, 2013
- Messages
- 6,852
- Reaction score
- 7,038
Some will say it will be fine, I wouldn’t like to leave my beer on the yeast that long. 2weeks is enough.
- Joined
- Oct 23, 2013
- Messages
- 5,469
- Reaction score
- 2,607
Yup that's where I was foxy.
Certainly transfer it to another keg (or a bucket and back). Prime & then leave it in the cool & dark until you want to serve.
But you don't say what you are brewing so that could all be cobblers, but I have a sneaky suspicion it's larger
Certainly transfer it to another keg (or a bucket and back). Prime & then leave it in the cool & dark until you want to serve.
But you don't say what you are brewing so that could all be cobblers, but I have a sneaky suspicion it's larger
@MashBagYup that's where I was foxy.
Certainly transfer it to another keg (or a bucket and back). Prime & then leave it in the cool & dark until you want to serve.
But you don't say what you are brewing so that could all be cobblers, but I have a sneaky suspicion it's larger
Larger than what ?
I haven't actually decided what I'm going to brew yet, but I'm picking up a brewzilla from the classifieds on Sunday however I'm off the drink until mid December (pre-christmas shred) so i wanted to make something for when I'm going to indulge again. I thought i could ferment then cold crash and leave to condition all in one vessel, but saw conflicting info about it hence asking :) I'll be back asking what i can make from the supplied malt/hops lol.
So i think using the advice from above, i will transfer to a sanitized bucket once fermented, clean/sanitize the chubby and transfer back, i can leave it in this under pressure until I'm ready to drink it. After fermentation, do i cold crash then transfer?
thanks
So i think using the advice from above, i will transfer to a sanitized bucket once fermented, clean/sanitize the chubby and transfer back, i can leave it in this under pressure until I'm ready to drink it. After fermentation, do i cold crash then transfer?
thanks
I'd cold crash first. Will drop a lot of trub out of suspension. Minimum two days, though three would be better.
![BREWING THERMOMETER STICKERS ACCURATELY MONITOR FERMENTING BEER & WINE LIQUID TEMPERATURES 5PCS HOME BREW SPIRITS WINE LCD ADHESIVE [US]](https://m.media-amazon.com/images/I/311DDjo2X3L._SL500_.jpg)
- Joined
- Oct 23, 2013
- Messages
- 5,469
- Reaction score
- 2,607
Probably if its a larger
but I wouldn't bother for an ale. In the spirit to this thread... What are you shredding pre Christmas?
Fat lol, I'm on a diet
- Joined
- Jul 29, 2009
- Messages
- 377
- Reaction score
- 336
By doing that you are almost certain to oxidise the beer. If you had another pressure vessel you could transfer the beer between them both oxygen free. The Oxebar 20 / 8 / 4 litre kegs would be ideal. Be a shame to go through the process of brewing and the beer to be spoilt.
I have x4 corny kegs that i acquired a few years ago, just waiting for seal kits to come for them. I assume i would need to use 2 for a greater than 19l brew?
- Joined
- Jul 29, 2009
- Messages
- 377
- Reaction score
- 336
No problem with short filling 2, they will be perfect.
- Joined
- Oct 23, 2013
- Messages
- 5,469
- Reaction score
- 2,607
It was the shredding that sounded painfulFat lol, I'm on a diet
- Joined
- Oct 23, 2013
- Messages
- 5,469
- Reaction score
- 2,607
@borischarlton
Do you have any recommendations or experience for priming short fills. Could they hold enough gas for dispense without needing a cylinder?
- Joined
- Jul 29, 2009
- Messages
- 377
- Reaction score
- 336
I don't ever prime kegs, simply force carb and serve with CO2.
