Punk ipa clone keeps foaming up!!

[Berry454]

Purchased a punk ipa clone partial grain kit from Dark Rock brewing.

All was good and everything gone smoothly.

Force carbonated at 30psi at 2 degrees c.

Running it through a 6 foot long 3/16” line .
My issue is that I’m getting complete foam coming out of my tap. I’ve tried everything from a 6 foot long line all the way up to 18ft and it’s still the same foam coming out of tap.

Even tried turning off the co2 COMPLETELY and serving without any pressure going into the keg and it still comes out as foam slowly.

Did I overcarbonste the beer??

 

[Caramel Ox]

Yes probably. The most reliable method is just to set serving pressure and leave for a week.

 

[Berry454]

Yes probably. The most reliable method is just to set serving pressure and leave for a week.

If I’ve overcarboned, what’s the best course of action? Just to keep pressure relieving the keg?

 

[Caramel Ox]

Yes you need to keep gas off, vent pressure, wait for co2 to come out of the beer, repeat etc.

 

[The Baron]

Yes you have overcarbed the beer do as Caramel has said and keep leaving for more co2 to come out then vent and so on until it is at a less foam serving