Octopus energy

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Definitely looking like brewing tomorrow now. Electricity is free until 10am. And I'll fill the battery up too so the rest of the brew can come from the battery
You persuaded me :D . I modified by Tesla tariff, will see if it charges the battery at that time. Two hours is sufficient time window for me to charge the battery from 40% to 100%. Will see how the battery behaves (fingers crossed)
 
You persuaded me :D . I modified by Tesla tariff, will see if it charges the battery at that time. Two hours is sufficient time window for me to charge the battery from 40% to 100%. Will see how the battery behaves (fingers crossed)

Really?! What output does your charger have?
 
Really?! What output does your charger have?
IMG_1019.png


Just under 6 kW
 
I managed to pull a steady 12kW for the 2 hours so saved just over a fiver, for the time of day.

It's not really that though, as it was all charging car and batteries and I would have done that on cheap rate normally so only really saved £1.68 I guess. Didn't have the stamina to put a brew on at 7am or put the chicken in early.
 
Overnight charge of the battery, heating up the brewing water and electric heaters during free electricity.
Brewed in the cheap hours whilst Bert is battering us, along with a cooked breakfast
Finished and cleaned up. Battery at full charge.

Total cost for the day. Negative 4p. 👌
 
Last edited:
I have one of those small pink octopus mini dongle thingies
Just signed up for one, it'll be useful to compare in real time against the Givenergy data to make sure what's being billed is what's expected. It complicated enough without having to try to view what happened in the past and compare it.

Not that I don't trust my smart meter, it appears to count in my favour a little when I have made retrospective comparisons, but I have heard of some others instances of billing errors, mainly due to installation issues like CT's on backwards etc. I think, so if you don't check it you'll never know.
 

Latest posts

Back
Top