Kegorator Gas connection

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

adyr

New Member
Joined
Apr 20, 2024
Messages
4
Reaction score
1
Location
Farnahm
So I've not been kegging long and have set up my kegorator with the gas and regulator outside of fridge and hooked up to 2 kegs inside with gas line running through the wall of the fridge. The issue I have is I now have a fermzilla to ferment in and want to use a gas supply to purge/close transfer/rouse hops. My fermenter isn't close to the kegorator. Does anyone have an easy solution for disconnecting/reconnecting the gas or do i need a seperate gas bottle as this should be avoided?
Cheers in advance.
 
What way is the gas line connected to the regulator currently? If it's a push fit connection like Duotight or John Guest, you could just disconnect there and connect to a short hose with a ball lock disconnect on it.

Or just fish around Gumtree or similar for a second hand CO2 cylinder.
 
Seem like I am quoting Big Banana all the time recently, he showed he has a dedicated line running from his keezer to his fermentation fridge across room , so it's doable , just don't know how much gas you will waste within the long run.

O and if your wanting pipes and connectors I found buying a RO kit was a lot cheaper than any other option and came with lots of different joints and connections all John guest types.

No affiliation.

GREDIA 3/8" inch Quick Connect... https://www.amazon.co.uk/dp/B08NVHRW6B?ref=ppx_pop_mob_ap_share
 
Last edited:
I have a corny gas post mounted on the outside of my barrelator and a gas quick connect on the gas line from the cylinder regulator. Easy to disconnect the cylinder and reconnect.
72715-052978EE-8DA4-4910-920A-CB104B46411B.jpeg
 
Last edited:
So I've not been kegging long and have set up my kegorator with the gas and regulator outside of fridge and hooked up to 2 kegs inside with gas line running through the wall of the fridge. The issue I have is I now have a fermzilla to ferment in and want to use a gas supply to purge/close transfer/rouse hops. My fermenter isn't close to the kegorator. Does anyone have an easy solution for disconnecting/reconnecting the gas or do i need a seperate gas bottle as this should be avoided?
Cheers in advance.
By "fermenter isn't close", is it in the same room? I have a JG splitter with a fairly long (~3m) length of 3/16 and a grey disconnect that I use for that sort of thing. When not in use, it can easily be coiled up and hung on a hook out the way.
Having just seen Buffer's post, I might be upgrading this some time.
 
I have a corny gas post mounted on the outside of my barrelator and a gas quick connect on the gas line from the cylinder regulator. Easy to disconnect the cylinder and reconnect.View attachment 105449
The new KegLand kegerator series X has something similar except it's just one. Wouldn't think it would be too hard to add on to an existing unit.
1730924778658.png
 
Just checked and they were doing it back in 2019. I did my build in 2022....but I wasn't aware of if what "they" were doing :coat:
Our silence is guaranteed. Nobody will know. asad.

I remember one of the Geterbrewed videos about the Femzilla and he was saying that if you lost the covering caps for the gas and liquid disconnect connections, that a coke bottle cap would fit exactly.

Which is a roundabout way of saying that if you wanted to find the male threaded part for the back of your kegerator to match their set up, a coke bottle would be a good starting place.
 

Latest posts

Back
Top