Innacurate Scales

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MyQul

Chairman of the Bored
Joined
Aug 7, 2013
Messages
5,000
Reaction score
7,120
Location
Royal Hamlet of Peckham. London.
I've just tested my general scales to see if they are still accurate after the 5 years I've had them. They measure 1021g for a litre of water. This 21g, I dont think would have much effect when measuring kilos of base malt but what about smaller amount of specialty malts. I'm too cack a maths to work out if this small amount of error will somehow be magnified when measuring small amounts
 
for small hop measurements buy a jewlers /drug dealers scale for a fiver from a market stall selling rizla's etc..

21 g in a 1000 represents circa 2% error.. (20/1000= 0.02)
 
Try measuring a few bags of sugar or something of a fixed weight as I would say that you have measured your own litre although I maybe wrong.

Sent from my ALE-L21

The 1L was the fixed weight. I was aware that if I just used 1 jug the markings might not be right but I have two measuring jugs and both showed the same at 1L
 
for small hop measurements buy a jewlers /drug dealers scale for a fiver from a market stall selling rizla's etc..

21 g in a 1000 represents circa 2% error.. (20/1000= 0.02)

I have jewellers scales for hop measurements. These other scales are just for grain. As I say I was concerned that somehow the 21g error could somehow magnify when measuring small amounts (like 100g - 250g)

Thanks for telling me what the error is. Id never be able to work that out :thumb:
 
I have jewellers scales for hop measurements. These other scales are just for grain. As I say I was concerned that somehow the 21g error could somehow magnify when measuring small amounts (like 100g - 250g)

Thanks for telling me what the error is. Id never be able to work that out :thumb:
Sorry didn't see your post on jewellers scales.

Sent from my ALE-L21
 
If you are using 1 litre of water it must be at 4 degrees C to obtain a true reading, this is when water is at it's densest, hotter or colder then allowances have to be made for expansion.

1 litre of water at 4c = 1kg, this should also give a gravity reading of 1.000.
 
If you are using 1 litre of water it must be at 4 degrees C to obtain a true reading, this is when water is at it's densest, hotter or colder then allowances have to be made for expansion.

1 litre of water at 4c = 1kg, this should also give a gravity reading of 1.000.

Hi!

But is the thermometer calibrated? :doh:
 
Back
Top