GhostShip
Junior Member
Having been lucky enough to have won an Inkbird ITC-308-WIFI smart controller in the giveaways thread on this website, I thought the least I could do was provide a review of it.
I already have an ITC-308, so setting it up with my fridge and tube heater was no problem - it simply replaced what was already there.
The first thing was to download the app - 'InkbirdSmart' onto my phone. The phone then has to be paired with the controller which was a case of entering my country of origin and e-mail address and then pressing on the 'Add Home' button to create a 'home'. You then click 'Add Device' and when the ITC-308-WIFI shows on the screen, select it. The controller has to be in the 'configuration state' (indicated by a flashing light) and you then select your wifi network and are asked to enter your network password. And that's it! All connected and I could immediately open the app on my phone and see the exact temperature of the fridge at that point.
One thing that did worry me slightly, was that the app appeared to require me to allow it to access my location, my camera and photos, my microphone and my phone storage. This actually applies to many apps and I often question why they would need access to everything on my phone. It is possible on the InkbirdSmart app, however, to turn off the permissions by going to Settings>Apps>InkbirdSmart>Permissions and switching them off. As far as I can see, it hasn't affected the operation of the controller in any way, which begs the question as to why it asks for access in the first place, but I'm not going to quibble - everything is fine now.
Setting the parameters is the same as for the ITC-308 and I won't go into it here. The screengrabs below are taken from my phone while in my office, which proves that the device is working exactly as it should. The current temperature is shown in the large circular window, while the set temperature is shown towards the bottom of the screen - next to the thermometer icon.
If the fridge comes on (or if the fridge was the last heating/cooling element used), the screen shows blue, if the heater comes on, the screen turns red and the word 'Heating' appears below the current temperature.
Clicking on 'Temp trend diagram' at the bottom left of the screen, shows a graph which depicts your set temperature. As mine has been set a 20.5C for the 6 days it's been in use, I just get a straight line. I'm struggling to see how this could be useful to anyone, but it certainly seems to work. Clicking on 'Settings' at the bottom right of the screen takes you to your set parameters.
You can click on any of the parameters and make changes from your remote location. It's not something I've needed to do and I'm not sure that I ever would, but I can confirm that I've tried it and it works perfectly. I guess if you wanted to cold crash after fermentation you could drop the set temperature without having to be there, but given it would probably take around 24 hours for the fridge to reach the desired temperature anyway, it's never going to be a 'cold crash' in the true sense.
For me, this is something of a novelty at the moment - I like the fact that wherever I am in the world I can check on the temperature of my brew fridge, but could I live without it? Without question, yes. It does exactly what it sets out to do and does it extremely well, but I'm still struggling to see how it might benefit my home brewing. I know Inkbird controllers are used for other things besides brew fridges, so it might be that having wi-fi capability would be a huge advantage in certain other situations. It may also be that as I go along (I'm only 6 days in), I find increasing benefits to having a wi-fi controller.
None of this detracts from the fact that I was very grateful to Inkbird for the giveaway and I can report that the controller is made to exactly the same high standards as other Inkbird products and does exactly what it sets out to do, brilliantly. Set-up is a breeze, the app is very nicely designed and the information within the app is highly accessible and easy to understand. A really nice piece of kit.
I already have an ITC-308, so setting it up with my fridge and tube heater was no problem - it simply replaced what was already there.
The first thing was to download the app - 'InkbirdSmart' onto my phone. The phone then has to be paired with the controller which was a case of entering my country of origin and e-mail address and then pressing on the 'Add Home' button to create a 'home'. You then click 'Add Device' and when the ITC-308-WIFI shows on the screen, select it. The controller has to be in the 'configuration state' (indicated by a flashing light) and you then select your wifi network and are asked to enter your network password. And that's it! All connected and I could immediately open the app on my phone and see the exact temperature of the fridge at that point.
One thing that did worry me slightly, was that the app appeared to require me to allow it to access my location, my camera and photos, my microphone and my phone storage. This actually applies to many apps and I often question why they would need access to everything on my phone. It is possible on the InkbirdSmart app, however, to turn off the permissions by going to Settings>Apps>InkbirdSmart>Permissions and switching them off. As far as I can see, it hasn't affected the operation of the controller in any way, which begs the question as to why it asks for access in the first place, but I'm not going to quibble - everything is fine now.
Setting the parameters is the same as for the ITC-308 and I won't go into it here. The screengrabs below are taken from my phone while in my office, which proves that the device is working exactly as it should. The current temperature is shown in the large circular window, while the set temperature is shown towards the bottom of the screen - next to the thermometer icon.
If the fridge comes on (or if the fridge was the last heating/cooling element used), the screen shows blue, if the heater comes on, the screen turns red and the word 'Heating' appears below the current temperature.
Clicking on 'Temp trend diagram' at the bottom left of the screen, shows a graph which depicts your set temperature. As mine has been set a 20.5C for the 6 days it's been in use, I just get a straight line. I'm struggling to see how this could be useful to anyone, but it certainly seems to work. Clicking on 'Settings' at the bottom right of the screen takes you to your set parameters.
You can click on any of the parameters and make changes from your remote location. It's not something I've needed to do and I'm not sure that I ever would, but I can confirm that I've tried it and it works perfectly. I guess if you wanted to cold crash after fermentation you could drop the set temperature without having to be there, but given it would probably take around 24 hours for the fridge to reach the desired temperature anyway, it's never going to be a 'cold crash' in the true sense.
For me, this is something of a novelty at the moment - I like the fact that wherever I am in the world I can check on the temperature of my brew fridge, but could I live without it? Without question, yes. It does exactly what it sets out to do and does it extremely well, but I'm still struggling to see how it might benefit my home brewing. I know Inkbird controllers are used for other things besides brew fridges, so it might be that having wi-fi capability would be a huge advantage in certain other situations. It may also be that as I go along (I'm only 6 days in), I find increasing benefits to having a wi-fi controller.
None of this detracts from the fact that I was very grateful to Inkbird for the giveaway and I can report that the controller is made to exactly the same high standards as other Inkbird products and does exactly what it sets out to do, brilliantly. Set-up is a breeze, the app is very nicely designed and the information within the app is highly accessible and easy to understand. A really nice piece of kit.
![BREWING THERMOMETER STICKERS ACCURATELY MONITOR FERMENTING BEER & WINE LIQUID TEMPERATURES 5PCS HOME BREW SPIRITS WINE LCD ADHESIVE [US]](https://m.media-amazon.com/images/I/311DDjo2X3L._SL500_.jpg)
