grainfather glycol chiller

[Topcook49]

hi
I have purchased a Grainfather Glycol Chiller.
I have primed the pump as the instructions state.
I have filled the tank with the required water/glycol ratio amount.
As instructed, Bled the system to get rid of the air bubbles.
attached to my Grainfather ferment-er as it should be.
It appears to be cooling as it should be, but the power button is flashing red all the time.
Is this normal or have I a problem?
Cheers Andy

 

[gyurmaember]

Google says you're low on glycol. Did you put more glycol in after bleeding it?

 

[Topcook49]

Yes it’s full. The level indicator is right at the top of the filler hole. I’ve asked google too and it says the same. I’ve held the button for 6 seconds to lock the factory setting. ( I had to set them as it wasn’t set when I got it ) the power light is now permanently on , still red but not flashing. How ever it appears to be working perfectly. I’m going to cold crash later this week so I’ll see how it gets on.
Any ideas why the power on button is red?
thanks for reply.
Cheers Andy

 

[gyurmaember]

Don't overthink it, it's meant to be red.

 

[Topcook49]

Thanks. Mind at rest

 

[Deadhead]

Hope you love it! I think it's absolutely ace!

 

[St00]

Before I forked out for my adapter kit I made this: Use any fermenter with this Grainfather Glycol Chiller
Very handy if you want to use the chiller with anything other than your Grainfather Conical.

 

[Zoiks]

Before I forked out for my adapter kit I made this: Use any fermenter with this Grainfather Glycol Chiller
Very handy if you want to use the chiller with anything other than your Grainfather Conical.

Really need to get on this, gave it a try with an old STC I picked up but couldn't get it on, have bought another one as the other one had been in storage for an age and I know they can be a bit dodgy.

 

[Zoiks]

Me, again....

Have sorted this for the chiller, really need to work out how to also add a heat source too, had a look at the thread on here but... mind = blown

 

[Twostage]

Me, again....

Have sorted this for the chiller, really need to work out how to also add a heat source too, had a look at the thread on here but... mind = blown

The STC should have two relays/outputs. One for cool and one for heat. They should be labelled.

 

[MashBag]

Me, again....

Have sorted this for the chiller, really need to work out how to also add a heat source too, had a look at the thread on here but... mind = blown

Stick on fuel tank heaters.
60w 220v red silicone. Brilliant.