Bridgewater Brewer
Active Member
- Joined
- Jul 14, 2013
- Messages
- 60
- Reaction score
- 4
For sale.
200l boil kettle. 2 mm stainless steel drum fitted with sight gauge, stainless tap, wooden lid and copper hop filter ( for whole hop not pellets). Good condition. £225
250 l ( approx) mash tun. Industrial drum on substantial metal frame complete with castors. Bottom draining via 25 mm stainless tap. Temperature probe glands on front and inlet. Ball valves for sparse and HERMS inlet. Wooden hinged lid. 50mm bubble wrap insulation. Holds temperature very well. £375. HERMS system used with above available separately by negotiation comprising large industrial kettle as heat exchanger, two probes and 2 PIDS mounted in control box.
200l hot liquor tank. Stainless steel tank fitted with immersion heater and recirculating pump to even out temperature. Complete with ball valve and flow metre. Ex narrow boat water tank. Currently used with PID. Tank baffled so temp takes a while to even out. Works ok but it's a bit crude, however being rectangular it will fit on a shelf above the tun. £125 without PID or pump. Please note this tank will supplied with suitable cable but the immersion heater element will not be wired up.
200l tank. Partner to one used as HLT ready for conversion. Needs a clean. £80
200l blue plastic barrel set up a fermentation vessel with brass valve and tube £35
200l blue plastic barrel set up as brite tank with beer line cooling coils fed via pump and beer cooler. Surprisingly effective £45
28 l blue barrel fermentors x2. With ball valves and temperature strips. £20 each
640 l conical fermentor. Blue plastic on galvanised chassis with very heavy duty castors. Compete with 50 mm stainless butterfly valve. Please note this fermentor will not go through a standard single door. £150
650l stainless steel shallow rectangular tank, complete with bottom draining tap and stainless lid. I bought it to make a mash tun out of. Paid £225 for it so offers around that I suppose.
Pictures are available via email. Would make an excellent 1BBL pilot system
200l boil kettle. 2 mm stainless steel drum fitted with sight gauge, stainless tap, wooden lid and copper hop filter ( for whole hop not pellets). Good condition. £225
250 l ( approx) mash tun. Industrial drum on substantial metal frame complete with castors. Bottom draining via 25 mm stainless tap. Temperature probe glands on front and inlet. Ball valves for sparse and HERMS inlet. Wooden hinged lid. 50mm bubble wrap insulation. Holds temperature very well. £375. HERMS system used with above available separately by negotiation comprising large industrial kettle as heat exchanger, two probes and 2 PIDS mounted in control box.
200l hot liquor tank. Stainless steel tank fitted with immersion heater and recirculating pump to even out temperature. Complete with ball valve and flow metre. Ex narrow boat water tank. Currently used with PID. Tank baffled so temp takes a while to even out. Works ok but it's a bit crude, however being rectangular it will fit on a shelf above the tun. £125 without PID or pump. Please note this tank will supplied with suitable cable but the immersion heater element will not be wired up.
200l tank. Partner to one used as HLT ready for conversion. Needs a clean. £80
200l blue plastic barrel set up a fermentation vessel with brass valve and tube £35
200l blue plastic barrel set up as brite tank with beer line cooling coils fed via pump and beer cooler. Surprisingly effective £45
28 l blue barrel fermentors x2. With ball valves and temperature strips. £20 each
640 l conical fermentor. Blue plastic on galvanised chassis with very heavy duty castors. Compete with 50 mm stainless butterfly valve. Please note this fermentor will not go through a standard single door. £150
650l stainless steel shallow rectangular tank, complete with bottom draining tap and stainless lid. I bought it to make a mash tun out of. Paid £225 for it so offers around that I suppose.
Pictures are available via email. Would make an excellent 1BBL pilot system
