Cip corny washer

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 23, 2013
Messages
5,483
Reaction score
2,619
Has anyone built a CIP head into the lid of a corny.

You could the connect a pump to the liquid port to recirc through the cip head.

Anyone?
 
Normally the approach is to turn the keg upside down and spray cleaner up into it, letting the cleaner run back down and out the lid into the pump reservoir. This way only need 5 litres ish of cleaner.

If you wanted to go the other way I guess you could connect the pump ‘out’ to the gas in side of the keg and go back out through the liquid ‘out’ side back to the pump… but unlike the upside down method you’ll need to fill the keg with cleaner.
 
Normally the approach is to turn the keg upside down and spray cleaner up into it, letting the cleaner run back down and out the lid into the pump reservoir. This way only need 5 litres ish of cleaner.

If you wanted to go the other way I guess you could connect the pump ‘out’ to the gas in side of the keg and go back out through the liquid ‘out’ side back to the pump… but unlike the upside down method you’ll need to fill the keg with cleaner.
The bucket blaster combines "upside down" with connecting the pump outlet to both the liquid out posts.

 
Back
Top