Bar pump help

[CraigP79]

Hi guys can anyone help I have a foster super chilled bar pump and want to take the back of it I’ve taken the 3 screws from top but can’t seem to open it does anyone know how please

 

[scomet]

G’Day Craig, not exactly but I have had a few similar Micromatic fonts apart to check the lamp voltage and they can be fiddly.

Rule #1 Dont get rough with it.

You will have to take it off the bar and check for screws etc under the bottom plate etc, I’m guessing you may have to disassemble the tap and pouring neck, this may be screwed in place much care required, then the back plate may have a spigot meaning you may have to lift it gently (or down) to pull if off. Do it slowly, it will come apart with lots of care…

Good luck. ps free advice, no responsibility :-}

 

[The-Engineer-That-Brews]

I don't know if this is the case here, but sometimes manufacturers like to hide the final screw under a sticky label, so it might be worth checking. If there's one there you can normally feel by pressing on the surface of the label. If you need to get the label off then heat it up for 5mins with a hairdryer first as it will soften the glue.