Hi everyone, due to a grainfather purchase, I now have lots of equipment which is needing to be sold and to give me more room in the brew shed. Its all collection there may be a few things I could post but would sooner not if I can help it :lol:. I am located just off J9 of the M6 in Wednesbury. Anyway I will list the items I have.
1. 70lt stainless steel Burgland HLT. Complete with 2 kettle element, 1 x hot condition lead, 2 piece ball valve, lid and one the one element a simmer stat from copper kettle. Its also marked on the steel in side in increments of 5 lts. Excellent condition, nice and clean. ã70
2. 70lt Boiler Burgland. Complete with 2 kettle elements, 2 x hot condition leads, Bazooka screen, 2 piece ball valve and lid. Same again nice and clean and marked on the inside. Rolling boil normally on 1 element. ã60
3. Igloo 45lt mash tun and rotating sparge arm. Comes with bazooka screen and 2 piece ball valve. Excellent condition nice and clean. And most people will know holds the heat very well. ã65
4. Mr Lards Split RIMS tube, 3KW LWD element and 60mm PT100 probe complete with cam lock fittings. Again excellent condition, element wired with a power con connector. ã110
5. Pid controller. Inkbird Pid controller in metal case, 40a ssr also 13a socket at rear what I used for my pump. I have popped the screw pin back into socket front as I need one in a emergengy. It has 1 x power con input, 1 x input for the sensor (PT100) and also a power con output for the heating element. All worked fine and did the job of controlling the tube and element fine. I also added a switch to the front to isolate the the power output to the element if needed. ã65
6. Camlocks and tubing. Have lots of cam locks male and female that I used with the set up I had. Around 7 big bore connectors lots of males and females. Its best to ask for a picture so you can see. All purchased off Mr Lard. Also have spare seals. Probably around 2.5 mts of silicone tubing. ã50
I will do my best to get back to anyone who wants pictures or need to ask anymore questions, but please be patient as I am more than likely to be at work. Payment can be cash on collection or pay pal not to fussed. All electrical items are used at the new owners risk. Sounds drastic but I need to cover myself.
So any questions pls get in touch. Thanks Again
1. 70lt stainless steel Burgland HLT. Complete with 2 kettle element, 1 x hot condition lead, 2 piece ball valve, lid and one the one element a simmer stat from copper kettle. Its also marked on the steel in side in increments of 5 lts. Excellent condition, nice and clean. ã70
2. 70lt Boiler Burgland. Complete with 2 kettle elements, 2 x hot condition leads, Bazooka screen, 2 piece ball valve and lid. Same again nice and clean and marked on the inside. Rolling boil normally on 1 element. ã60
3. Igloo 45lt mash tun and rotating sparge arm. Comes with bazooka screen and 2 piece ball valve. Excellent condition nice and clean. And most people will know holds the heat very well. ã65
4. Mr Lards Split RIMS tube, 3KW LWD element and 60mm PT100 probe complete with cam lock fittings. Again excellent condition, element wired with a power con connector. ã110
5. Pid controller. Inkbird Pid controller in metal case, 40a ssr also 13a socket at rear what I used for my pump. I have popped the screw pin back into socket front as I need one in a emergengy. It has 1 x power con input, 1 x input for the sensor (PT100) and also a power con output for the heating element. All worked fine and did the job of controlling the tube and element fine. I also added a switch to the front to isolate the the power output to the element if needed. ã65
6. Camlocks and tubing. Have lots of cam locks male and female that I used with the set up I had. Around 7 big bore connectors lots of males and females. Its best to ask for a picture so you can see. All purchased off Mr Lard. Also have spare seals. Probably around 2.5 mts of silicone tubing. ã50
I will do my best to get back to anyone who wants pictures or need to ask anymore questions, but please be patient as I am more than likely to be at work. Payment can be cash on collection or pay pal not to fussed. All electrical items are used at the new owners risk. Sounds drastic but I need to cover myself.
So any questions pls get in touch. Thanks Again
![BREWING THERMOMETER STICKERS ACCURATELY MONITOR FERMENTING BEER & WINE LIQUID TEMPERATURES 5PCS HOME BREW SPIRITS WINE LCD ADHESIVE [US]](https://m.media-amazon.com/images/I/311DDjo2X3L._SL500_.jpg)
