You really need to provide more information, grain bill, volume, mash temperature and length of mash, OG.
its still at 20 a week later
If the engine stops, it absolutely needs to be re-ignited. Otherwise you're just sitting there making car noises and twitching the wheel. "Is the third land" has me stumped btw.
It was a Mangrove Jacks Brewers Series 40 Pint Pale Ale and recommended using Mangrove Jacks 1.5kg Pure Liquid Malt Extract - Light or sugar. I went for the extract.If the engine stops, it absolutely needs to be re-ignited. Otherwise you're just sitting there making car noises and twitching the wheel. "Is the third land" has me stumped btw.
@Shaun-p this is a beer kit, yeah? Malt extract and yeast with added sugar. MJ make these (if it's their Hazy IPA) in 10 pint and 18L versions. If it's that kit, you should have started higher than 1030. It's supposed to finish at 6.8% ABV, which could be higher than 1060. Those kits usually need an addition of about 1Kg of sugar to bring up the alcohol content.
Their instructions are less than helpful. Don't say what OG or FG to expect, so I checked it roughly on Brewers Friend with 1.7Kg of LME and 1Kg of DME. Got an OG of 1039 with a FG of 1011 and 3.7% ABV.
Snap!
My bad " 3rd lane"If the engine stops, it absolutely needs to be re-ignited. Otherwise you're just sitting there making car noises and twitching the wheel. "Is the third land" has me stumped btw.
Are you? Are you really? "Engine stops". Unless you're ninja fast on the clutch (assuming a manual gearbox and top gear), the car will stop. Dead. /pedantMy bad " 3rd lane"
No sitting there making car noises and twitching you are still moving in 70mph traffic.
Glad I covered all eventualities so.
And where is it?
