No I did on my old ACE, it works but you have to set more than one schedule. The Eff was massive so threw out my figures so next time just reduced the grainbill
Overnight mash on a grainfather?
- Thread starter MashBag
- Start date
Help Support The Homebrew Forum:
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Gordon's alive.
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Now if I can just get it to stay in celcius.... I will get a mash on.
Agentgonzo
Landlord.
- Joined
- Aug 23, 2021
- Messages
- 3,928
- Reaction score
- 4,244
You can set it through the grainfather app.
Equipment -> gf30 -> measurement.
Even if you only use the app for this once it'll probably remember it in the unit
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Nope..
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Controller is in C
Last edited:
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Although the total water is a bit high 
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Not really. I do it all the time but at 20c.... But not with a GF controller whose minimum temp 30c
Last edited:
Are you doing an overnight step mash or a single temp? If a step then I would programme in all the steps, let it run through until the step prior to mash out and hit Pause. Leave it there overnight and hit Start when I woke up for it to heat up to mash out temp. By the time I’ve had a coffee and a wash it would be time to lift the grain basket, sparge (if sparging) and run the boil.
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
I currently use 5 steps to get an full 12h offset.
7pm Press start run away
Two steps to burn time @20c
Protein rest @52c
Mash @65 or whatever
Mash out @72
7am ready to boil.
I return coffee in hand.
Grain out, lid on and nip off for breakfast. Back in time for first hops.
Works very well on a BM. But on a GF controller ?
7pm Press start run away
Two steps to burn time @20c
Protein rest @52c
Mash @65 or whatever
Mash out @72
7am ready to boil.
I return coffee in hand.
Grain out, lid on and nip off for breakfast. Back in time for first hops.
Works very well on a BM. But on a GF controller ?
- Joined
- Oct 23, 2013
- Messages
- 4,804
- Reaction score
- 2,293
Solved: changing Fahrenheit °F to Celsius °C
So temp setting are done in 3 places..
On the controller.
On the recipe
And really important (as this seams to override everything else) in the personal preferences in login.
Looks much better in c
I've used the same approach as @stripeyjoe mentioned, mainly to get a head start on a double brew-day. I ran to mash out and then wrapped in a duvet & some other sheets. It had lost about 7º over the 8 hours I left it.
