Mr.Everready
Well-Known Member
The instruactions say...
It doesn't say to rack the wine before adding the stabiliser or finings. Should I follw the instructions or rack before I add the stabiliser ?
7. Fermentation will be complete when hardly any bubbles are going through the airlock (less than one per minute). Check the wine with a hydrometer, and taste it. If it is too sweet allow it to continue.
Red Wines 990-994 White/Rose Wines 990-996
A hydrometer reading should be the same for three continuous days, if in doubt leave for a further period, it will do the wine no harm at all. Once you are sure the fermentation is complete add the sachet of Stabiliser (this gives off a gas when mixed with the wine, do not inhale this), shake the container for 3 or 4 minutes to remove the carbon dioxide gases. This should be repeated several times (at least 3 times a day for the next 3-4 days). The more this is done the easier it will be to clear the wine.
8. The wine should now have the finings added. Add the sachet of Kieselsol to the container, shake for 10 seconds to mix, replace cap and leave for 24 hours. Now add the Chitosan to the container, shake for 10 seconds to mix, and replace cap. Leave in a cool place to clear. The wine should be clear in 3-7 days, dependant on the conditions it could be before this. Finings work best if they are lightly mixed in (folded in).
9. When the wine is clear, it should be carefully syphoned off
It doesn't say to rack the wine before adding the stabiliser or finings. Should I follw the instructions or rack before I add the stabiliser ?