porridge oats

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bigd2657

Well-Known Member
Joined
Sep 24, 2016
Messages
155
Reaction score
19
Location
manchester
Hi all,

can anyone explain how I would use porridge oats in a BIAB recipe as I have been told that they will help in creating a nicer looking head of beer after the beer has fermented.

Also for a 25 litre batch how much porridge oats should I put in, and when abouts do I put them in with my grains or wait till near the end of the mash to put them in please..



many thanks
 
Hi gerry t
Would using oats make a creamy beer as well.
If not what else could I use to make it creamy and a good lasting head.

Thanks
 
If you're doing BIAB and just lifting the bag out, I wouldn't worry about a stuck mash, issues tend to arise when recirculating the wort. As @GerritT says, keep them at 5% or below.
 
Also how wod I get a stuck mash, as I want to try and not get one.

The expression is "stuck sparge", I was mixing things up, my bad. It's when you have the grains in a sieve and slowly rinse ("sparge") the leftover sugars out of them. (small brewers use sieves, bigger brewers use false bottoms and other parafernalia, but it's all sieves, trust me). To rinse properly the water needs to be able to flow THROUGH the grains. If it's a sticky mess, because the milling crushed the grains too fine, or there is a sticky substance in the mash (like oats), it will become a lump and "sparge" water will pass around it, not through it. Efficiency will go through the floor, the brew will be weak, you will sleep badly for a few nights. Can it be solved? Hm, cutting it with a knife to let water through might help. Swearing might help. Shrugging and adding DME for compensation might help.

But it's better to avoid it, closely following recipes is a lot of prevention.
 
I really like what 5% porridge oats does to my pale single hop ales. I wouldn't say creamy, but I believe it improves body and head.
 
As Rockuranium say you dont need to worry about stuck sparges with BIAB, just chuck em in with the rest of the grains. I'm using them tomorrow in a oatmeal stout/mild and will be using 5% as per the recommendation
 
I'm glad this came up.
I did several brews with Oats and I should do some again. Some of my best early brews had oats, I got great results roasting them too! Think I did a step mash with them ...... must check my notes aunsure....

Sorry Big D, I'm not really answering you question, but I hope someone step in.
 
005.jpg
 
I guess mouthfeel might suggest thick and creamy ......... like Guinness used to be. Or maybe it still is - I haven't had one for while.
 
I use porridge oats in nearly every brew and re-circulate if I think there is a danger of a stuck sparge I add some oat husks but usually a couple of stirs in the first 10 mins of mash sorts it out
 
I've just done a porter (today) and added 150g of Aldi organic porridge oates (BIAB). OG was slightly lower than expected but I think that was down to too much liquor. Haven't got the finished product yet of course but everything seems good so far. I just added the oats in with the rest of the mash malts and gave it a good old stir every 20 mins.
 
I've just noticed the small brewery near me (Orbit Brewery) lists 'Oats' as one of it's ingredients ......... and that's in a American style Pale Ale !!
 

Latest posts

Back
Top