Of sight tubes and sealing wax

[Beardy]

well not sealing wax, but it scans better :)

I'm building a brewery, but as those that have done it know, it needs a good deal of looking at! Perhaps I should say I'm trying to build a brewery :|

On the issue of sealing sight tubes, I've got skin fitting, and I've got polycaronate tube. Considering I've decided not to use brass or copper unless absolutely necessary [1] what can I use to join the two up. Obvioulsy I can use SS elbows, either street or all female, and the easy solution would be to use John Guest push fits, but there must be a more SHINY solution. does anyone have any suggestions please?

1. It started out as an idea, and now seems to have become an obsession. Though I suspect the cooling coil will have to be copper :cry:

 

[Vossy1]

but there must be a more SHINY solution. does anyone have any suggestions please?

Push fit fittings are widely available in a lot of materials including ss, mainly being used in the hydraulic and pneumatics industry :thumb:

1. It started out as an idea, and now seems to have become an obsession. Though I suspect the cooling coil will have to be copper

here
:twisted: :twisted: :twisted: :twisted: :whistle:

 

[Beardy]

Push fit fittings are widely available in a lot of materials including ss, mainly being used in the hydraulic and pneumatics industry :thumb:

ta

1. It started out as an idea, and now seems to have become an obsession. Though I suspect the cooling coil will have to be copper

here
:twisted: :twisted: :twisted: :twisted: :whistle:[/quote]
La la la laa!