Nukatap shank / thread to standard pub beer font

[Siscokid85]

Hi All.

Does anybody know of a clamp on beer font that will work with a nukatap shank at all:

Something like this....

https://rlbs.ltd.uk/refurbished-angram-classic-chrome-clamp-on-font-2.html

The nukatap beer towers require a hole to be drilled in the worktop, i would like to avoid this and have a clamp on set up so it is semi permanent (thats what the mrs will let me get away with!)

Any help appreciated.

 

[YeastFace]

This is what you need I think.

Nukatap shanks are 5/8" and the tower you linked is 1/2".

https://www.themaltmiller.co.uk/product/stainless-steel-58-to-12-bsp-converter/?v=79cba1185463

 

[Siscokid85]

Thanks

This is what you need I think.

Nukatap shanks are 5/8" and the tower you linked is 1/2".

https://www.themaltmiller.co.uk/product/stainless-steel-58-to-12-bsp-converter/?v=79cba1185463

Thanks for this @YeastFace, That will adapt the threads, but I cant get my head around how I would use this and attach a beerline the celli taps have a built in 3/16 push fit on the back of the shank, leaving the outer thread bare to screw into the the font a bit like the below....

https://www.ebay.co.uk/itm/35525892...7jSuZGcnZBzhvzxyIfTQ44C9v-1I5pBxoC26QQAvD_BwE

Think I am probably looking for something that doesn't exist. I brought the nukataps with the idea of doing a kegerator, but have since gone off the idea due to space for fridges that arent undercounter