Kegging help

[irish1759]

Kegged by first beer last week, carbonated at 15psi for 3 days then purged and dropped to 10psi @3°C for rest of the week. Was using a picnic tap to dispense but coming out like shaving foam and no liquid. Connected a tap and same issue. The tap is one of the ones that connect to the outpost of the corny keg.
Any ideas, I have purged few time and psi at 5psi and same issue. Settles eventually like in the photo. Can it be fixed at all.
Pic is when itbis left for 10mins

 

[Rodcx500z]

Hi, i have 2 party taps and 2 flow control taps, the party taps are these Deluxe Party Tap Kit – BrewKegTap the short 3/8th tube at the tap end is important has yours got that, taps that fit on the keg unless it has flow control you will never get a good pour NukaTap Flow Control - Keg Mounted – BrewKegTap hope this helps

 

[irish1759]

No I just had a 8mm tube about 2meters in length was going to swap out for 3/16 tube. Couldnt find something similar in Ireland for sale, but I'll keep looking. Thanks for the help

 

[Hazelwood Brewery]

Get the carbonation of your beer right, then sort out the beer line. If you beer is overcarbed, turn off the supply and let out all the pressure, a few hours later let all the pressure out again. Then set the pressure you want.

Use 3/16 line and make it longer than you think you will need to start. If you’re looking for 10psi, maybe start with 4’ and if that’s too much cut off 4” at a time to get a good flow without a glass of foam.