Camberwell Canary
Active Member
- Joined
- Apr 26, 2013
- Messages
- 45
- Reaction score
- 1
Getting rid of my beloved keezer due to lack of space (I now have two children!). It's about 5 years old. Homemade with a solid oak collar. All the parts including the Lec freezer were brand new when I built it. Fits two full corneys and a half corney.
Needs a drip tray, a CO2 canister and a temperature controller (e.g. STC1000). Otherwise it's ready to go.
LxDxH = 96x52x103cm
Height is floor to top. The depth is not including the taps and the brackets on the back holding on the lid. These add 10-20 cm
For collection only (London SE5 plenty of free parking nearby). Also you (or your assistant) need to be reasonably physically fit to help me get it up and down two flights of stairs and around an awkward corner.
The parts cost this much new: freezer £180; the purlick taps were about £75 each; the regulators are about £60 each; the oak I have no record.
Needs a drip tray, a CO2 canister and a temperature controller (e.g. STC1000). Otherwise it's ready to go.
LxDxH = 96x52x103cm
Height is floor to top. The depth is not including the taps and the brackets on the back holding on the lid. These add 10-20 cm
For collection only (London SE5 plenty of free parking nearby). Also you (or your assistant) need to be reasonably physically fit to help me get it up and down two flights of stairs and around an awkward corner.
The parts cost this much new: freezer £180; the purlick taps were about £75 each; the regulators are about £60 each; the oak I have no record.