iSpindel problem

[Leard]

I am trying to calibrate my iSpindel. I have set it to an interval of 15 seconds. However, when I exit the setup mode of it, and let it connect to my wifi, it will send one reading to BrewSpy, and then nothing else. I'm currently at 10 minutes since the last reading. It doesn't seem to be sending another. I've tried twice to set a different interval setting, and it does the exact same thing where it will send a reading and then nothing else.

It's clearly connecting to my wifi, but it seems to be ignoring my interval choice.

 

[Agentgonzo]

It might be a stupid question, but you did hit the save button after setting it to 15s?

 

[Agentgonzo]

You can check whether it's actually waking up and trying to send data. Each time it wakes up, the blue LED lights up/flickers. (The red/green one will stay on all the time).

If the blue one is flashing every 15s then the ispindel is sending data. If not, then you've not applied your configuration correctly.

 

[Leard]

It might be a stupid question, but you did hit the save button after setting it to 15s?

Yeah, like 4 times now.

 

[Agentgonzo]

It might also be brewspy. I don't use that, but I know what grainfather restricts how often you can send it data and rejects updates more than one an hour. Brewspy may do the same - so even of your ispindel is sending data, brewspy may be rejecting it

 

[Leard]

It's even showing the interval setting I last set it to when I go back into setup.

 

[MashBag]

Set it to 10mins (or the default) and see if that works. If so, then work down until it doesn't.

 

[Rwilts]

As stated above 15sec is quick, I use brew father and 15 min intervals