Fittings for line cleaning

[CaptAwol]

Sorry if this comes across as a bit long winded, but it's difficult to explain hopefully you'll all understand.
Previously I have dispensed from 20l polypin ale bags via a beer engine basically serving as cask ale, stop fermentation about 1.010 no fining or priming, this works very well for my taste as gasy beers don't agree with me.
As I now consider the polypin bags as unsustainable, I have invested in some corny kegs, I still intend to dispense same as before in a cask style ale.
With my present setup, I clean some of the used polypins and use them for recycling water from the plate chiller on a brew day, this works well for cleaning lines as simply add cleaner to one bag and use another for rinsing, connecting to beer engine straight forward.
The polypins use v-top connectors and the new system has these corny kegs connection, what I need is some suggestion on connecting the polypins to the new system.

 

[AnimatedGIF]

Do your v-top connectors attach to 3/8 line? If so, maybe v-top to black disconnect, then use one of these: Ball Lock Keg Liquid Jumper Post - Double Ended Corny Post

 

[CaptAwol]

Do your v-top connectors attach to 3/8 line? If so, maybe v-top to black disconnect, then use one of these: Ball Lock Keg Liquid Jumper Post - Double Ended Corny Post

Cheers that's a great solution, didn't even know such a thing existed

 

[AnimatedGIF]

Cheers that's a great solution, didn't even know such a thing existed

Nor did I until recently (like, last week). I hope it does what you need it to.

 

[CaptAwol]

Not often I get a bonus, but the off cuts from the floating dip tubes fit perfectly between the v-top connector and the keg post thingy.

 

[BlackRegent]

Those double ended posts also work for gas, which is a godsend when I'm using my Blichmann beer gun as it means I can connect the gas without a lot of faffing about reconfiguring the system

 

[AnimatedGIF]

Those double ended posts also work for gas, which is a godsend when I'm using my Blichmann beer gun as it means I can connect the gas without a lot of faffing about reconfiguring the system

I found mine leaked when I used gas disconnects for exactly the same reason