Easy Keg 5L
- Thread starter Bevvied
- Start date
Help Support The Homebrew Forum:
stephenmanuel
Active Member
I have two. They are brilliant. Advice: Turn the regulator to the lowest setting when the beer is finished and you are pulling out the tube, so you save the unused CO2 for the next MK. Also, keep the regulator turned down when you push the tube into the next MK because you wont need extra CO2 for the first pint or so. Brew UK is much cheaper than The Home Brew Shop. I'll make a note. Regarding the little "O" ring that comes with the chrome spout: it works fine without so don't worry when it perishes.
dave_walton
Well-Known Member
First sample from the mini keg tonight Youngs American IPA chilled nicely. Very impressed and as good as any beer you can buy in a pub. Very impressed.
Sent from my LG-D855 using Tapatalk
Sent from my LG-D855 using Tapatalk
Bought 4 of the easy kegs last week and my first attempt at small batch biab is ready to go into one.
Without reading the whole thread anyone kindly suggest how much to prime a stout with in one of these?? Thinking about 10g?
Without reading the whole thread anyone kindly suggest how much to prime a stout with in one of these?? Thinking about 10g?
MyQul
Chairman of the Bored
I prime mine to 20g per keg
- Joined
- Aug 12, 2015
- Messages
- 10,736
- Reaction score
- 10,672
For a stout you may want to go less than 20g but saying that mine haven't turned out how I wanted them yet.
MyQul
Chairman of the Bored
Perhaps but my last brew in the MKs was a porter. I've found I get better head retention when using the MK's as well as nice lacing in the glass. The wheat malt probabaly helped as well but I was getting a head like guiness. Really creamy with small tightly packed bubbles
Cheers went with 15g ill see what it's like and maybe up it next time!
MyQul
Chairman of the Bored
When I first got my MK's I read that your only supposed to prime to half your normal amount or you'll blow them up. But I found that at that rate (12g) was far to low. Then I read to prime them at 20g and found this to be much more to my likeing. I dont like highly carbed beers but 20g is just right for me.
- Joined
- Aug 12, 2015
- Messages
- 10,736
- Reaction score
- 10,672
Can't remember how much I primed my porter with. Only one way to find out lol
MyQul
Chairman of the Bored
Methinks you should conduct several tests in the name of science :geek:
- Joined
- Aug 12, 2015
- Messages
- 10,736
- Reaction score
- 10,672
Yes, nearly finished a keg of Pilsner so once that's done I will move onto the porter
sdt7618
Landlord.
- Joined
- May 12, 2016
- Messages
- 867
- Reaction score
- 285
Anyone had a mini keg like this one, and can it be reused?
https://www.my-food-online.net/drin...s-frische-faesschen-5-liter-4-8-vol-partyfass
https://www.my-food-online.net/drin...s-frische-faesschen-5-liter-4-8-vol-partyfass
marlon
Senior Member
Yes it can. But,,,,,,,, it has to be converted first. I buy a lot of these type of kegs - with different beer in - and convert them. I drill a hole in the top, to the side of the centre outlet, pull out the spent gas cartridge and glue the top end of a lucozade bottle into the hole I've drilled. You need a strong glue - I use Araldite Rapid (other glues are available). There are pictures etc that I posted on THIS thread, 1st July, page 81. Why do it..? Because I'm tightass and don't like throwing stuff away. Take a look:arrow:
marlon
Senior Member
Thanks Chippy, - me & confusers don't always get on..:thumb:
Dutto
Landlord.
PROBLEM!
On 8th July I bottled and kegged a brew of Fulstows Recession Session with an FG of 1.009.
Today I went to tap the last of the MK's and as I pushed the tap into the top of the MK beer came squirting out from MK/Tap seal of the bottom valve.
It finally stopped (after I had lost a fair amount of beer on to the floor) and has now apparently sealed itself.
I am assuming that the MK was over-pressurised for some reason (it tastes okay so I'm assuming it was me rather than a wild yeast getting in there) and I have a number of questions:
1. Do I bin the MK?
2. Do I remove the bottom tap assembly, clean it and return it; and if so then how?
3. Can I use the MK again without doing anything at all?
This has never happened before so I'm a bit worried because I intended to fill my nine MKs and take them to France with me in a few weeks time.
With the GBP>Euro rate being so low the last thing I will need is to have an MK dumping 50% of its contents onto the ground in France.
Trying to persuade SWMBO that I have to buy French beer will go down like a lead balloon!!
Comments and assistance please! :thumb: :thumb:
PS
Still need the "What to do next?" advice on the MK but looking back at my records (i.e. before I started numbering my MKs) there is a good chance that this one contained Fulstows IPA and that I overfilled the MK because I filled it before I made the "depth float"!
That would definitely explain why it suddenly started spraying beer everywhere when I inserted the wand of the tap!
PPS
The bottom seal has resealed itself and filled with water and pumped up it has now held pressure for three days! Weird eh?
On 8th July I bottled and kegged a brew of Fulstows Recession Session with an FG of 1.009.
Today I went to tap the last of the MK's and as I pushed the tap into the top of the MK beer came squirting out from MK/Tap seal of the bottom valve.
It finally stopped (after I had lost a fair amount of beer on to the floor) and has now apparently sealed itself.
I am assuming that the MK was over-pressurised for some reason (it tastes okay so I'm assuming it was me rather than a wild yeast getting in there) and I have a number of questions:
1. Do I bin the MK?
2. Do I remove the bottom tap assembly, clean it and return it; and if so then how?
3. Can I use the MK again without doing anything at all?
This has never happened before so I'm a bit worried because I intended to fill my nine MKs and take them to France with me in a few weeks time.
With the GBP>Euro rate being so low the last thing I will need is to have an MK dumping 50% of its contents onto the ground in France.
Trying to persuade SWMBO that I have to buy French beer will go down like a lead balloon!!
Comments and assistance please! :thumb: :thumb:
PS
Still need the "What to do next?" advice on the MK but looking back at my records (i.e. before I started numbering my MKs) there is a good chance that this one contained Fulstows IPA and that I overfilled the MK because I filled it before I made the "depth float"!
That would definitely explain why it suddenly started spraying beer everywhere when I inserted the wand of the tap!
PPS
The bottom seal has resealed itself and filled with water and pumped up it has now held pressure for three days! Weird eh?
Last edited:
Tapped my first keg last weekend and I'm so impressed I've ordered a bunch more so that I can use these for most of my brews.
You can order a maximum of 8 from Leyland as one delivery in case anyone's wondering.
You can order a maximum of 8 from Leyland as one delivery in case anyone's wondering.
MyQul
Chairman of the Bored
Liking your glassware btw
Love that glass!
It was a birthday present quite a few years ago, I think it's the "Ultimate Beer Glass" https://www.amazon.co.uk/Dartington-Crystal-83DR2295-Ultimate-Glass/dp/B000KKJL6E
Last edited by a moderator:
