Morning all
I have read the many threads on rebooting a stalled fermentation and I will implement some of the usual tactics tonight. But as I sit here shackled to the desk and my mind wanders from a tedious report, I figured it would be a better use of my time asking some questions on the HBF. Background is as follows, brew is an AG chocolate milk stout OG 1050ish, Safale 04 pitched dry at say 21C, femerntation temperature apparently set to 20C, off to a flyer for a few days, now 10 days in SG is stuck at c1030.
This is my first stuck ferment but there were a number of 'new' factors associated with this so I thought I would check with forum and see if any of them throw up any obvious explanations:
1. First use of lactose - obviously this should result in a higher FG beer but not this high. Other than being unfermentable I'm assuming lactose doesn't otherwise inhibit the yeasts performance?
2. First use of cacao nibs - I soaked them in about 100ml of vodka to sterilise and chucked the whole lot in loose. Surely this cant affect things.
3. First use of stainless steel fermentor. Brewbelt is attached around lower part of fermentor. Could all the heat just be being conducted away and notwithstanding that the inkbird is showing 20C the wort is actually closer to ambient temperature which is pretty cold at night. Also probe is attached (insulated) to outside of FV which has never been a problem with plastic buckets.
I think first step tonight will be to open it up and get a thermometer down in the wort but it is frustrating being sat here knowing the wort is not progressing.......
I have read the many threads on rebooting a stalled fermentation and I will implement some of the usual tactics tonight. But as I sit here shackled to the desk and my mind wanders from a tedious report, I figured it would be a better use of my time asking some questions on the HBF. Background is as follows, brew is an AG chocolate milk stout OG 1050ish, Safale 04 pitched dry at say 21C, femerntation temperature apparently set to 20C, off to a flyer for a few days, now 10 days in SG is stuck at c1030.
This is my first stuck ferment but there were a number of 'new' factors associated with this so I thought I would check with forum and see if any of them throw up any obvious explanations:
1. First use of lactose - obviously this should result in a higher FG beer but not this high. Other than being unfermentable I'm assuming lactose doesn't otherwise inhibit the yeasts performance?
2. First use of cacao nibs - I soaked them in about 100ml of vodka to sterilise and chucked the whole lot in loose. Surely this cant affect things.
3. First use of stainless steel fermentor. Brewbelt is attached around lower part of fermentor. Could all the heat just be being conducted away and notwithstanding that the inkbird is showing 20C the wort is actually closer to ambient temperature which is pretty cold at night. Also probe is attached (insulated) to outside of FV which has never been a problem with plastic buckets.
I think first step tonight will be to open it up and get a thermometer down in the wort but it is frustrating being sat here knowing the wort is not progressing.......