Beer kit stuck on 1.018, was it my process?

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Berry454

Regular.
Joined
Feb 2, 2021
Messages
216
Reaction score
82
Do mostly AG lately but had one of these Geordie Bitter beer kits lying around so decided to brew this kit up with a mini mash.

I done a mini mash which was 2kg pale ale malt mashed at 68 degrees Celsius for 60 minutes.

Drained straight into the fermenter after sparging and added the extract beer kit tin to the fermenter.

Fermented down to 1.020 in 3 days and left it for a full 7 days at 20 degrees Celsius.

After 7 days it was still on 1.020 with no sign of activity so I raised the temperature to 24 degrees Celsius and gave it a good stir.

Nothing after 3 days still on 1.020.

Added a sachet of Safale S-04 yeast and left it for another week at 24 degrees Celsius.

It’s now on 1.018 and absolutely no signs of further activity.

Did my process cause this? Was this something to do with their already being unfermentables in the Geordies kit which only added more from my mash? Maybe it’s best just using plain old dextrose with these kits?

Would really be great to know if the mash process which I done with the 2kg of pale ale malt could have contributed to this? Just as I have a further 4 Coopers kits which I would like to brew up using the same method.
 
How much water in the mash?
What was the volume in the fermenter?
How much yeast did you pitch?
What was the O.G?

The O.G. could have been to high for the yeast.

Thanks for your response..

I done the mash with 10 litres of water. I usually do 20 litres for a full AG brew but as this was less than half the amount of grain 10 litres felt right.

Mash volume: 10 litres
Mash temp 68c
FV (fermenter volume) 19 litres
SG 1.048
FG 1.018 (currently)

I pitched the normal sachet of yeast that came with the Geordie bitter beer kit. Can’t say what yeast this was as it isn’t branded on the packet. Though at 1.048 SG even if it fermented down to 1.010 (my goal gravity) it would have only topped out at 4.99% which should totally be within the tolerance for most yeasts.

Plus if it was a yeast tolerance issue I imagine it would have started back up with the Safale S-04 which I pitched to try and restart fermentation as this is tolerant up to 9%+.

Sadly after pitching the Safale S-04 it only gone from 1.020 to 1.018.

As said would be really good to know if any process in my mash could have caused this as I was planning to do my other left over beer kits using the same method.

I know 68c is on the high side for mashing but I have stuck to this temperature for a long time. 10+ AG brews with everything from lagers to red ales and never had an issue.
 
Well 68c is quite a high mash temp which will give you more unfermentable sugars, but I wouldn't have expected it to stop fermentation that high.

Yeah it’s a strange one isn’t it and honestly not an issue that I have ever had with beer brewing. Part of me is wondering if this possibly an issue with the kit.

This is my first bitter beer brew, how bad is 1.018 for an English bitter? Not sure if to toss the whole thing really. Don’t have a lot of keg space free (10/12 corny kegs are currently full) so don’t really have the space to be keeping anything which isn’t worth it.
 
Well looks like you're just going to have to do a taste test to see if it's too sweet

The sugars that are left over, considering they aren’t fermentable what exactly are these? Dextrine maybe? Though I would imagine dextrine would be fermentable!

It does concern me slightly that every litre at 1.018 contains over 50g of sugar compared to less than 24g / litre at 1.010.

As said would just be nice to know what I am consuming!
 
Back
Top