I have :party:
Cheers Tom
Cheers Tom
Ace micro brewer
- Thread starter billmcc
- Start date
Help Support The Homebrew Forum:
billmcc
Active Member
- Joined
- Jun 14, 2011
- Messages
- 34
- Reaction score
- 7
What do you think of this bit of kit for the price.
http://www.ebay.co.uk/itm/ACE-Micro...114137a&pid=100033&rk=4&rkt=4&sd=322320786484
unboxing video here.
[ame]https://www.youtube.com/watch?v=yyvGLJ5kV-0&t=2s[/ame]
mgkpancake
No ragrets
- Joined
- Dec 27, 2016
- Messages
- 106
- Reaction score
- 39
Hah you were the one that posted this, this is brilliant! Thank you. I just ordered mine too. :thumb:
nigelnorris
Beavis at Bat
No, it's what they do when they're out of stock to stop people ordering.
Shiny shiny all right!
You could think is it worth spending all that money?? I battled with spending 600+ beaver pelts on aGF..
Dint like the dials all the way down..
Being disables it will take ages to get down and read it and adjust! But at least they are incorporated and not another part that would be assembled...if the whole display knack up (wiring defect etc) getting it sorted...how getting it sorted?
I'll need to look closely in the reviews before I can comment anymore..
For now ã600+ well spent in my gf!
There's always a shiny shiny in the market...all singing all dancing that will satisfy your needs!
Not saying this would be the one!
But the price needs to be the out of this world!! Specially if your sure your AG is going to step up in the hobby!
Think like all the 'all in one systems'
It's what you pay for...
I miss the fun of my ol three tier AG set up...it worked (eventually tweaking it!) but things like these takes the fun and initial learning out of it!
Still shiny shiny n I'll love shiny shiny!! If I was rich!!! Lol
You could think is it worth spending all that money?? I battled with spending 600+ beaver pelts on aGF..
Dint like the dials all the way down..
Being disables it will take ages to get down and read it and adjust! But at least they are incorporated and not another part that would be assembled...if the whole display knack up (wiring defect etc) getting it sorted...how getting it sorted?
I'll need to look closely in the reviews before I can comment anymore..
For now ã600+ well spent in my gf!
There's always a shiny shiny in the market...all singing all dancing that will satisfy your needs!
Not saying this would be the one!
But the price needs to be the out of this world!! Specially if your sure your AG is going to step up in the hobby!
Think like all the 'all in one systems'
It's what you pay for...
I miss the fun of my ol three tier AG set up...it worked (eventually tweaking it!) but things like these takes the fun and initial learning out of it!
Still shiny shiny n I'll love shiny shiny!! If I was rich!!! Lol
Eh!!!
Am I missing something about the price?? The one in Evilbay was over
1,325.00...
Hmmmmm! Prop it 'Brian' thinking again...n not looking properly!! Lol
Am I missing something about the price?? The one in Evilbay was over
1,325.00...
Hmmmmm! Prop it 'Brian' thinking again...n not looking properly!! Lol
mgkpancake
No ragrets
- Joined
- Dec 27, 2016
- Messages
- 106
- Reaction score
- 39
Whoa! It was not this much when I purchased it. it was 325+5.99 shipping
mgkpancake
No ragrets
- Joined
- Dec 27, 2016
- Messages
- 106
- Reaction score
- 39
Nigel is right, called them, and that's exactly what they said. They're sending my unit out today for the price I bought it for 325+shipping.
I'll post a review when I get it.
Hope a GF Vs Ace micro brewer is looming?
I'll gradly watch that with interest!
I'll gradly watch that with interest!
Phewwww! Confusing in my tiny brain again!!!
Yous know I get confused with a 1 peice jigsaw puzzle..
But that eBay add is nearly put me reaching for my medication!
Thx all for understanding...lol
Mmmmmmmmm! The penny dropped!!!
Personal91
Landlord.
- Joined
- Jun 18, 2016
- Messages
- 1,223
- Reaction score
- 219
Did they say when they were going to get any more in ?
Mine came today
One of the screws that holds the false bottom legs was missing. A quick call to them and they're sending some out.
Top service, can't fault them......
Cheers Tom
One of the screws that holds the false bottom legs was missing. A quick call to them and they're sending some out.
Top service, can't fault them......
Cheers Tom
mgkpancake
No ragrets
- Joined
- Dec 27, 2016
- Messages
- 106
- Reaction score
- 39
You know mate, I dont know as I didn't ask. Just wait till this chap and I post some more reviews- we'll let you know if its worth it!
Personal91
Landlord.
- Joined
- Jun 18, 2016
- Messages
- 1,223
- Reaction score
- 219
Keep me posted as really want to go all grain soon
I also have a stick welder btw :whistle:
nigelnorris
Beavis at Bat
Must be back in stock, price has dropped to ã325 now.
mgkpancake
No ragrets
- Joined
- Dec 27, 2016
- Messages
- 106
- Reaction score
- 39
Hehe stick welders are cool. Just not enough resolution to make the quality welds for small applications like welding a bung or doing stainless steel. :)
Personal91
Landlord.
- Joined
- Jun 18, 2016
- Messages
- 1,223
- Reaction score
- 219
If got a good welder if you do want help with a project, I've forgotten the model off the top of my head but I remember it being able to do tif aswell if I get the accessories
One comment on the temp probe...........
Seems a bit slow to read the actual temp. Did a short boil test today with water and it was out by between 3 and 8c. Was worried I'd got a duffer but once it had reached the boil the reading was near enough spot on with my Hanna probe all the way down to 60c. Will do another test tomorrow heating to 70 on my hand held and see how long it takes the built in probe to catch up. Will report back
Cheers. Tom
Seems a bit slow to read the actual temp. Did a short boil test today with water and it was out by between 3 and 8c. Was worried I'd got a duffer but once it had reached the boil the reading was near enough spot on with my Hanna probe all the way down to 60c. Will do another test tomorrow heating to 70 on my hand held and see how long it takes the built in probe to catch up. Will report back
Cheers. Tom
Similar threads
