Search results

Thought that would be the case. Thanks for putting my mind at ease I didn't want to ruin the sacred beer lol :cheers:

So I'm currently brewing a woodfordes wherry and its been in the fv 2 weeks. Usually I would move to bottles or keg but haven't got the time to do it. Would another week in fv effect the taste or will it actually be better for the beer

Basically it is that you have a permanent neutral to every thing and when you want something to stop you just break the live to it. So when the fridge is down to twmperature the thermostat just breaks the live circuit. If you have a sparky friend would definantly be worth getting him to check it.

The switch will be wired in before the pcb so you could keep the switch and just get rid of the pcb. Then you will still have a means of turning it on and off from the front

No i mean take it off the main switch on the front of your fridge. The switch that turns the fridge on and off. Sorry it's hard explaining things over a screen some times lol

The fan will be fine if its run all the time. Most fridges have them this way any way. Just find a permanent live a neutral. Take it off the switch on the front. Make sure that its the switched side tho so that it goes off when you turn the fridge off

The relay is on that circuit board. The other smaller wires are the probes. They can just be disconnected and thrown away. The only wire you will need for the fridge side is the brown blue and black and they are 1.5 mm so they are adequate as its 13 amp fused any way

The circuit board has a live neutral an switched live to it. Just chuck the old circuit board away and put the live and neutral to the supply of the stc, link the live across to the common on your stc and put your switched wire onto the comp terminal. It's a domestic fridge believe me they...

the wires going from the circuit board will already be going to the compressor. you just need to disconnect the circiut board as you will be using the stc1000 to control the compressor.

Yes you can mate. Work out what your live and neutral wire to the board are an the other one will be the feed to the compressor. The 3 that go in the top if the board from your picture are just the sensors from what I can make out. Yes you can just use the fridge supply for the heater. It will...

Yh and just put a light in there for the heating side

Be carefull when drilling mate on most home fridges the refrigerant gas pipes are in the walls of the fridge. If you drill the pipe it's bye bye fridge

just make sure you put a water trap in it or your garage will smell like the neighbourhood toilet :sick:

Well if it didn't hiss for long it may have re sealed. . You don't have to use 1 bulb for each pint do you. That would get expensive

If the gas was coming out you could have lost all of your pressure. Does beer still come out of the tap

If its coming out of the co2 valve try pressing the pin in and hope that it re seats itself.

Have ya taken a hydrometer reading to see if it has finished. Largers can produce an eggy smell when fermenting. What temp have you got the beer at now

it says on the website posted that it is food safe. food safe just means that the bottles are cleaned before being re charged with co2.

Brewing and moto gp. Next in line is fishing :D

Personally don't no if I'd want to eat an animal that has helped mankind for hundreds of years. But then again if it tastes good in a lasagne :lol: