Quick JG adapter fitting question - 1/4 BSP?

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

conorm

Active Member
Joined
Jun 29, 2012
Messages
36
Reaction score
8
Location
Holywood, Co. Down
Thanks, I had my doubts about the different threads!

So what's the thread size on a quick connect, e.g. a ball lock disconnect on my corny?
 
Thanks, I had my doubts about the different threads!

So what's the thread size on a quick connect, e.g. a ball lock disconnect on my corny?
If you check out the Malt Miller site…
https://www.themaltmiller.co.uk/product/keg-disconnect-gas-in-thread/
They refer to the thread as 7/16 thread. The thread is also referred to as 1/4 FFL….
https://www.kegoutlet.com/what-does...1vjZNAANuUtaiqIuNb5KfkkaQzFEmF5B3uL8tLQcfcMhM
You can see a 1/4 FFL has a 7/16”- 20UNF thread, hence the reference to 7/16.
:?:
 
I've bought a 3/8 BSP to 1/4 push fit off ebay, closest I could find. Just now need a 1/4 to 3/8 bush which I can pick up at local plumbing merchant, and a length of 1/4 OD tube which I'm sure I have anyway.
 
I've bought a 3/8 BSP to 1/4 push fit off ebay, closest I could find. Just now need a 1/4 to 3/8 bush which I can pick up at local plumbing merchant, and a length of 1/4 OD tube which I'm sure I have anyway.
Forget you got the wrong one. Get those @Buffers brewery linked. They're Vyair, not John Guest, but I wouldn't have JG if they were half the price (even at 1/2 price they'd still be more than anyone else's anyway and will probably break on assembling). You don't want adapters so you can use the wrong sized adapter!

@Buffers brewery: Sorry, missed that post of yours (I missed it 'cos I thought I hadn't :roll: ).
 
I've bought a 3/8 BSP to 1/4 push fit off ebay, closest I could find. Just now need a 1/4 to 3/8 bush which I can pick up at local plumbing merchant, and a length of 1/4 OD tube which I'm sure I have anyway.
Think you might have got the wrong one ashock1. The gauge you've got has a 1/4 BSP thread so a 3/8 BSP won't fit. (Well it will but it won't stay put 😂). The link I sent you gives you the option of a 1/4 BSP that will fit your gauge and a 3/8 push fit to match your pipe. No adaptors necessary just some PTFE tape on the gauge thread.
 
Unfortunately at £14 shipping it's a no-go. |Had a search on Ebay and cant find any other instances of the same fitting :(
Screenshot_20241213-093628.png

Where are you? According to the seller Free Postage?
 

Latest posts

Back
Top