TMM corny kegs

[gyurmaember]

Anyone have experience with TMM own branded corny kegs?
Or shall I just order a few and compare them with the crapland ones?
To be honest I have so much disappointment in crapland, and I'd rather give my money to local businesses, but I can't find anything about their kegs.

 

[Rodcx500z]

I got mine from brew keg tap Premium Double Keg Kit - choice of Keg, Tap and Regulator

 

[Mayor of Simpleton]

I got mine from brew keg tap Premium Double Keg Kit - choice of Keg, Tap and Regulator

Really happy with everything I have ordered from BKT. If there are any issues, their customer service is top notch as well. I got all my keg set up from them along with my canning machine.

 

[LeeH]

Is there any real saving over AEB?

Buy twice and all that…..

On another note all my ‘crapland’ FV’s (3) regs (5) blowties (2) have been flawless.

 

[dave_77]

I have a malt miller 19l keg and very similar to my Kegland one..I would buy either again.

 

[Jordang]

Anyone have experience with TMM own branded corny kegs?
Or shall I just order a few and compare them with the crapland ones?
To be honest I have so much disappointment in crapland, and I'd rather give my money to local businesses, but I can't find anything about their kegs.

I’ve been eyeing a couple up as I need these taller thinner ones for my beer engine fridge!

 

[AnimatedGIF]

Anyone have experience with TMM own branded corny kegs?
Or shall I just order a few and compare them with the crapland ones?
To be honest I have so much disappointment in crapland, and I'd rather give my money to local businesses, but I can't find anything about their kegs.

What's wrong with kegland ones? I prefer mine over my new AEB. I find they seal better, and don't have razor-sharp rims!
Unfortunately I cannot vouch for TMM kegs, but notice they're marginally (£2) cheaper than Kegland ones, so next time I need one I'll give it a go.

 

[LeeH]

I’ve got a new Kegland 9.5L on route so will compare with my family of AEB when it arrives from brewkegtap

I wasn’t aware on how much the AEB kegs have gone up by the past 2 years.

 

[dave_77]

What's wrong with kegland ones? I prefer mine over my new AEB. I find they seal better, and don't have razor-sharp rims!
Unfortunately I cannot vouch for TMM kegs, but notice they're marginally (£2) cheaper than Kegland ones, so next time I need one I'll give it a go.

Agreed , I have a new AEB keg and I have cut my hand on the rim. Prefer the maltmiller or kegland and cheaper.

 

[gyurmaember]

What's wrong with kegland ones? I prefer mine over my new AEB. I find they seal better, and don't have razor-sharp rims!
Unfortunately I cannot vouch for TMM kegs, but notice they're marginally (£2) cheaper than Kegland ones, so next time I need one I'll give it a go.

Their kegs are ok so far, everything else keep failing on me, or never worked as intended. They tried to rip me off once, with a roll of gas pipe. So I'm completely lost trust in Kegland as it is, that's why I'm looking for an alternative, and I came across TMM kegs.

 

[MickDundee]

Their kegs are ok so far, everything else keep failing on me, or never worked as intended. They tried to rip me off once, with a roll of gas pipe. L

Can I ask what you’ve had that’s failed on you? I’ve found Kegland products very good and superb value for money (especially from their AliExpress store).

 

[AnimatedGIF]

I wasn’t aware on how much the AEB kegs have gone up by the past 2 years.

Blimey, just saw that new AEB 19L are £105. What I find odd is that the new AEB 23L are £1 cheaper at £104.

I can see why TMM are doing their own now.

 

[labrewski]

The homebrew company do reconditioned kegs at a fair price I got 2 with no problems

 

[LeeH]

The homebrew company do reconditioned kegs at a fair price I got 2 with no problems

They are the fat type which can be problematic in fridges.

 

[labrewski]

They are the fat type which can be problematic in fridges.

There in my fridge constantly for the last 2 years working fine maybe I got lucky so

 

[LeeH]

Sometimes they are a little too wide.

 

[GhostDoggyWoofWoof]

TMM reconditioned still £55. Seems like a good price.

 

[GhostDoggyWoofWoof]

Brewkegtap currently same price.

 

[gyurmaember]

Can I ask what you’ve had that’s failed on you? I’ve found Kegland products very good and superb value for money (especially from their AliExpress store).

2 spunding valves, 2 nukataps, quite a lot of duotight fittings leaking, some become brittle (no direct sunlight) gas and liquid connectors falling apart, series x become very noisy (hopefully it's not on its last legs).
I'm sure I missed something, it'll come up eventually, or if you wish browse my other comments.
When I started up I've ordered every month from their AliExpress store, I wish you never have to get in touch with their customer service there.

 

[MickDundee]

2 spunding valves, 2 nukataps, quite a lot of duotight fittings leaking, some become brittle (no direct sunlight) gas and liquid connectors falling apart, series x become very noisy (hopefully it's not on its last legs).
I'm sure I missed something, it'll come up eventually, or if you wish browse my other comments.
When I started up I've ordered every month from their AliExpress store, I wish you never have to get in touch with their customer service there.

Surprised to hear that because most of my Kegland gear has been going for 2+ years (I set up my kegerator in July 2020) with no issues at all.

The only issues I had was my ODL regulator stopping working after falling about a foot from a folding step a fortnight after I bought it (replaced it was a Kegland one that I have dropped more than once and still works), and some terrible leaking liquid disconnects which were non-Kegland ones I ordered from GEB.