Are there any adapters that will allow me to connect a king keg to a pub co2 bottle via a regulator? It presently using s30 bottles but my local supplier may be dropping them.
King Kegs and pub CO2
- Thread starter marshbrewer
- Start date
Help Support The Homebrew Forum:
I have a Young's value pressure barrel which I fitted an S30 valve to and then converted a tyre pressure gun which was £8 online bu replacing the hose with silicone tubing so it hooks up to the regulator line.
Sent from my ALE-L21 using Tapatalk
You could also try this
https://brewingathome.co.uk/product/midget-widget-world-universal-barrel-hose/
Sent from my ALE-L21 using Tapatalk
You could also try this
https://brewingathome.co.uk/product/midget-widget-world-universal-barrel-hose/
That universal barrel hose looks just the job, thanks!
Bigjas
Landlord.
I use the universal barrel hose that Gerryjo has linked to in his post. It works very well with my king kegs. I use Cornys for most of my beers, but often dig out an old King Keg when I have too much beer.
Dutto
Landlord.
I use a Sodastream CO2 Bottle, the Pressure Regulator from the Dark Farms Growler system for CO2.
For the PB's, I've adapted an old bicycle pump to provide the CO2 and put a Schrader Valve in the top of my PB's.
Here's the PB system.
I've left the S30 valve in place because it provides a Pressure Relief System.
For the PB's, I've adapted an old bicycle pump to provide the CO2 and put a Schrader Valve in the top of my PB's.
Here's the PB system.
I've left the S30 valve in place because it provides a Pressure Relief System.
