Fridge for a 4x Corny Kegerator

[conorm]

I've currently got my kegs and taps outside, perfect serving temperature.

I foresee things getting too warm in a month or so, I'd like to make a kegerator for 4x 19l corny kegs and 2kg CO2 tank.

I've been looking for second hand one on gumtree / FB for a month now but not seen anything suitable. So looking ay new.

What height should I be looking at?

I'm assumimg 155cm total height is too small?

https://www.currys.co.uk/products/logik-ltl55w23-tall-fridge-white-10248715.html

 

[conorm]

Just found this which is useful. Now thinking two under counter fridges might be the more sensible option.

https://www.thehomebrewforum.co.uk/threads/list-of-fridge-internal-dimensions.96050/

 

[Leon103]

I've currently got my kegs and taps outside, perfect serving temperature.

I foresee things getting too warm in a month or so, I'd like to make a kegerator for 4x 19l corny kegs and 2kg CO2 tank.

I've been looking for second hand one on gumtree / FB for a month now but not seen anything suitable. So looking ay new.

What height should I be looking at?

I'm assumimg 155cm total height is too small?

https://www.currys.co.uk/products/logik-ltl55w23-tall-fridge-white-10248715.html

Not many that would fit 4 kegs and a CO2 tank. Perhaps keep the gas out of the fridge?

 

[Dazzelknight]

Maybe you should think of making a keezer. Look for a cheap 2nd hand one.. Plenty of tutorials on YouTube

 

[conorm]

I'm soooo out of the loop. Keezer for the win.

 

[conorm]

Right. So I'm picking up a 400l freezer at the weekend for £80. Win.

In the meantime, I've looked in to controlling. Everybody uses inkbird controllers. That's fine. But to save myself £30, I remember I had an PECO Electrim mash controller from way back. It can be reprogrammed from a heating controller to a cooling controller. I found this out accidentally years ago. Anyway, I've figured it out again and posting in case it can benefit anybody else who happens to have an old Electrim EB1D digital mash tun controller and wants to use it to control a Keezer.

instructions to access programme mode here:
https://files.ekmcdn.com/pecoservices/resources/other/eb1d-e31-module-instructions-and-settings.pdf

1. Access programming mode by pressing and holding down the P button for several seconds until "SLS" or "LS" is displayed. Press P again.
2. Press "P" until you see "rHC" or "HC" being displayed.
3. Press the down or UP arrow to change the parameter from "H" (heat) to "C" (cool).
4. Press "P" to save again. Don't press any more buttons to exit from the menu.
5. Test by setting the SP (set point) to a value higher that ambient. You should hear the relay click on. Change temperature again to a value lower than ambient, and you should hear it click off.

 

[Rwilts]

@conorm

useful thread here

https://www.thehomebrewforum.co.uk/threads/kegerator-build-or-buy.100079/#post-1166207