Ajhutch
Landlord.
- Joined
- Apr 12, 2016
- Messages
- 2,329
- Reaction score
- 1,256
Brewed this on Thursday night. It should be roughly speaking an ale version of an amber kellerbier. I don't have the temperature control to brew lagers but this should be the sort of thing I can readily drink in their place when I fancy a break from hoppier stuff.
Recipe (20L batch):
2kg Munich Malt
2kg Vienna Malt
300g Crystal 60L
Mashed at 67C for one hour
50g Hallertauer Mittelfruh (3% alpha) for 60mins
20g Hallertauer Mittelfruh for 5mins
65g Saaz (2% alpha) for 5mins
Irish Moss at 10mins
K-97 German ale yeast
SRM 10.1
IBU 24
OG 1.047
Target ABV 4.58%
It was right around freezing so I brought my boiler/mash tun inside for the mash and wrapped in blankets, which meant I lost minimal temperature over the hour. The pre boil volume and gravity were pretty much spot on. Took ages to get to the boil, predictably enough 2.4kw element and a few blankets vs freezing temperatures is a good battle! It was nearly 11pm when the boil ended and in my desire to get finished I didn't cover myself in glory. I didn't really allow a long enough settling before I started running off so I have a lot of the trub in my FV, and in the haste plus only outside lights I smashed my hydrometer and thermometer! No big deal, easily replaced the next day at wilko. When I tested I was way over target gravity and way under volume. I topped up with 4 litres of bottled water and brought both in line. I need to adjust my BeerSmith default settings because I've missed low on volume and high on gravity both times with my new boiler.
I no chilled in my FV sealed with sanitised cling film. By the time I got home from work the next day I actually had to let the wort warm up a little inside before pitching at 10C, bottom end of the yeast's range. It's now at 16-18 inside, top end of the range and bubbling away nicely. I'm planning to move it outside into cooler temperatures for a pseudo lagering phase at some point, need to decide precisely when.
Should be an interesting beer, looking forward to it and will try to dial it in for future brews so will definitely be keen to offer it up for a bottle swap for feedback when it's ready.
Recipe (20L batch):
2kg Munich Malt
2kg Vienna Malt
300g Crystal 60L
Mashed at 67C for one hour
50g Hallertauer Mittelfruh (3% alpha) for 60mins
20g Hallertauer Mittelfruh for 5mins
65g Saaz (2% alpha) for 5mins
Irish Moss at 10mins
K-97 German ale yeast
SRM 10.1
IBU 24
OG 1.047
Target ABV 4.58%
It was right around freezing so I brought my boiler/mash tun inside for the mash and wrapped in blankets, which meant I lost minimal temperature over the hour. The pre boil volume and gravity were pretty much spot on. Took ages to get to the boil, predictably enough 2.4kw element and a few blankets vs freezing temperatures is a good battle! It was nearly 11pm when the boil ended and in my desire to get finished I didn't cover myself in glory. I didn't really allow a long enough settling before I started running off so I have a lot of the trub in my FV, and in the haste plus only outside lights I smashed my hydrometer and thermometer! No big deal, easily replaced the next day at wilko. When I tested I was way over target gravity and way under volume. I topped up with 4 litres of bottled water and brought both in line. I need to adjust my BeerSmith default settings because I've missed low on volume and high on gravity both times with my new boiler.
I no chilled in my FV sealed with sanitised cling film. By the time I got home from work the next day I actually had to let the wort warm up a little inside before pitching at 10C, bottom end of the yeast's range. It's now at 16-18 inside, top end of the range and bubbling away nicely. I'm planning to move it outside into cooler temperatures for a pseudo lagering phase at some point, need to decide precisely when.
Should be an interesting beer, looking forward to it and will try to dial it in for future brews so will definitely be keen to offer it up for a bottle swap for feedback when it's ready.
Last edited: