Get Er Brewed BIAB All Grain Starter Kit

Alexislife · Aug 18, 2015

Hello...

Firstly apologies if this is in the wrong section.

Having spent time debating where to start with home brewing today I've taken the plunge and opted to get this kit from Get Er Brewed. With 20% off seemed like a good deal.

Anyone else got this kit or brewed the American Pale Ale that comes with it?

ManseMasher · Aug 18, 2015

Did you also use the 5% discount for members?

Alexislife said:
Hello...

Firstly apologies if this is in the wrong section.

Having spent time debating where to start with home brewing today I've taken the plunge and opted to get this kit from Get Er Brewed. With 20% off seemed like a good deal.

Anyone else got this kit or brewed the American Pale Ale that comes with it?

Alexislife · Aug 18, 2015

ManseMasher said:
Did you also use the 5% discount for members?

I did put the code in before checkout but didn't seem to discount any further, just looked again and looks like it should have worked. DAMN! I blame the fact I was ordering it on my phone on the way to work.

Oh well 20% is still pretty good.

Leon103 · Aug 18, 2015

I would be interested in a review and photos to compare against the HBC kit

Alexislife · Aug 20, 2015

Leon103 said:
I would be interested in a review and photos to compare against the HBC kit

Kit arrived today, hopefully be unpacking and brewing this Saturday. Will take some pics and share when I can.

wfr42 · Aug 21, 2015

Looks like a good deal. Well spotted and enjoy!

Spapro · Aug 21, 2015

Will be interested to hear how the false bottom works, interested in one myself but not sure if it will stay in place during the boil - no biggie for you and not something to worry about.

Enjoy your new kit, pretty good value there !

dweb · Aug 23, 2015

I have to place 2 stainless steel egg cups at the bottom of the boiler to keep the false bottom level,otherwise it won`t sit properly and will rest directly on top of the element.

MrBarrySir · Aug 25, 2015

Took the plunge and ordered this today after being enthused by Clibit's 'simple AG' post. I've only done kits before so looking forward to this. The kit comes with a lot of bits I already have from brewing kits but the boiler, false bottom, wort chiller and the grain kit combined seemed than cheaper than buying separately.

An other option I was tempted to go for was the 50l pot for around ÃÂ£39 from catering portal but it meant finding all the other bits seperate. If / when I upgrade it seems like the logical route.

Quick question, would I be able to fill a corny from this 32l boiler?

Cheers

clibit · Aug 25, 2015

MrBarrySir said:
Quick question, would I be able to fill a corny from this 32l boiler?

Cheers

Yes, no problem.

Spapro · Aug 25, 2015

You can boil around 26 litres safely in the Peco boiler - after losing some to the boil and whats left in the bottom of the boiler below the tap level you should be able to get 20litres I would think into your FV which should give you 19l for your corny.

If during the boil the level drops much below 22 litres I would top up with boiling water to get you back to 22 litres at the end of the boil, before transferring to your FV.

I used my new boiler for the first time and kept topping up the boil to 25-26l as wanted 23 litres in my FV. I lost quite a lot as the tap kept getting blocked. Your false bottom (which I don't have as got my kit from the HBC) should help reduce any clogging of the tap.

Good luck with the brew and enjoy your new kit!

MrBarrySir · Aug 25, 2015

Thanks for the replies, very helpful. Although, why is the tap getting blocked. Isn't everything apart from liquid contained within the bag?

Spapro · Aug 25, 2015

EDIT: just realised this is the kit with the false bottom so you should be fine.

I don't have the false bottom with my kit and my tap got blocked up a bit with coagulated proteins floating in the wort after the boil.

An easy solution adopted by many on here if you do have this problem is to jug the boiled wort through a sieve into your FV.

I have picked up a brupaks hop strainer which should push fit into the rear of the tap in the boiler but not tried it yet.

Covrich · Aug 25, 2015

Spapro said:
EDIT: just realised this is the kit with the false bottom so you should be fine.

I don't have the false bottom with my kit and my tap got blocked up a bit with coagulated proteins floating in the wort after the boil.

An easy solution adopted by many on here if you do have this problem is to jug the boiled wort through a sieve into your FV.

I have picked up a brupaks hop strainer which should push fit into the rear of the tap in the boiler but not tried it yet.

DIdn't you go for a peco boiler? you changed the tap aswell?

Spapro · Aug 25, 2015

Covrich said:
DIdn't you go for a peco boiler? you changed the tap aswell?

Hi Covrich,

I went for the ÃÂ£81 HBC kit with the Peco boiler - but no false bottom/hop strainer, just comes with a plastic tap.

I have just picked up one of these for ÃÂ£9 new off ebay which pushes into the rear of the pastic tap in the peco boiler, not used it yet but thought for ÃÂ£9 it was worth a try:
http://www.homebrewcentre.co.uk/copper-hop-strainer

MrBarrySir · Aug 25, 2015

Coagulated proteins?! Nobody warned me about these! Is this left at the bottom of the brew?

Covrich · Aug 25, 2015

MrBarrySir said:
Coagulated proteins?! Nobody warned me about these! Is this left at the bottom of the brew?

Do not worry about it too much , this is all part of what the irish moss whirlfloc aids to do is coagulate the proteins together (which also helps if you cool the wort quicker I believe) If you can leave this behind in the kettle great, if some gets in your brew do not sweat it.. Tbh it is difficult to keep out anyway.

You will find unlike brewing with kits say you will generally have a lot more sediment at the bottom of your FV

clibit · Aug 25, 2015

The proteins are helped to coagulate by the Irish moss/whirfloc/Protofloc, and this helps it to drop to the bottom. Any that gets into the FV will also drop to the bottom. It's normal. You want it to drop out, it creates clear beer.

Sonnal · Aug 25, 2015

I too have the Peco Electrim boiler from HBC. The first time I used it for the Hobble Wobble kit the tap got blocked by hop leaves and other guff so I bailed out most of the wort with a sanitised jug and poured the wort through a sanitised sieve lined with muslin. This worked well and the amount of sediment left in the FV is not too bad.

The second time I did a smaller 10 L batch in the boiler but put my hops in large hop bags for the boil. The tap didn't bung up this time but I still ran the wort through the muslin lined sieve.

MrBarrySir · Aug 27, 2015

Thanks for the help so far. Due to get this next week sometime - they're saying due to massive demand they're waiting on chillers coming through before they can ship out the kits.

One more question - what exactly will i need to get the copper wort chiller working? is it just a case of buying any old hose, chop it in two and attach with jubilee clips? I'd probably run it from my garden tap outputing to the sink.

Get Er Brewed BIAB All Grain Starter Kit

Help Support The Homebrew Forum:

Well-Known Member

Regular.

Well-Known Member

Landlord.

Well-Known Member

Landlord.

Senior Member

Regular.

Active Member

Senior Member

Senior Member

Active Member

Senior Member

Geek

Senior Member

Active Member

Geek

Senior Member

Brewster

Active Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!