Simcoe Mild

clibit · May 21, 2015

Simcoe Mild
Simcoe in an English mild. Fabulous!

Batch Size (L): 10.0
Original Gravity (OG): 1.041
Final Gravity (FG): 1.008
Alcohol by Volume (ABV): 4.30 %
Bitterness (IBU): 29.2

Grain Bill
----------------
1.300 kg Maris Otter Malt (74.71%)
0.200 kg Wheat Malt (11.49%)
0.150 kg Crystal 75 (8.62%)
0.070 kg Black Malt (4.02%)
0.020 kg Chocolate (1.15%)

Hop Bill
----------------
5.0 g Simcoe Leaf (13.2% Alpha) @ 60 Minutes (Boil) (0.5 g/L)
5.0 g Simcoe Leaf (13.2% Alpha) @ 20 Minutes (Boil) (0.5 g/L)
5.0 g Simcoe Leaf (13.2% Alpha) @ 5 Minutes (Boil) (0.5 g/L)

Mash at 65Â°C for 60 Minutes.
Ferment at 18Â°C with Mauribrew Ale 514 / US05

davejhs · Sep 25, 2015

Was going to brew this mild.
Any thoughts on adding a handfull of fresh wallnuts into the boil.
As I quite like beers with a nutty flavour and I have a large wallnut tree at bottom of garden.

clibit · Sep 25, 2015

I think you need to crush and toast the oils in the oven to reduce the oil content and then put them in the mash. there's some guidance here...

https://byo.com/hops/item/2530-brewing-gone-nuts

I also found this post on an American forum:

"My buddy and I recently made a Maple Pecan Nut Brown Ale. We mashed nearly a pound of them in with the grains in our partial mash. We had toasted them about 6 times to get any oils off. We added maple syrup five minutes before the end of the boil. We kegged it, and when we tapped it, it had an amazing nitro-stout like head even though it was on CO2. As long as you get the oils off by toasting and mash them in, the head should be fine. The beer was amazing (and the smoothest 9% I've ever had!)."

There's very little mention of walnuts that I can find, I don't know how suitable they are, but got to be worth a try.

davejhs · Sep 25, 2015

Thanks for the reply.
I may crush them and boil in a small quantity of water.
Then skim off the oil.

clibit · Sep 25, 2015

davejhs said:
Thanks for the reply.
I may crush them and boil in a small quantity of water.
Then skim off the oil.

Let us know how it works out if you go ahead.

davejhs · Sep 26, 2015

Brewed today with walnuts.
Made a 15 litre brew that ended up at 12.5 litres OG 1.050
Used some of my own walnuts and added some that i purchased.
Crushed and boiled 100 gms then drained off water roasted in oven and added to boil.
When boiling there was a scum on top,not sure if it was oil from nuts so skimmed off.
Wort has a nice taste so cant wait till its ready to drink.
Also those simcoe hops smell fantastic.

davejhs · Sep 27, 2015

It has started to ferment slowly but there looks like a film of oil on top.
Will siphon from under the oil into another FV.
Hopefully I wont waste to much and it will be oil free.
Dont know if yeast is affected by oil.

clibit · Sep 27, 2015

I wouldn't worry I think, just siphon it at the end of fermentation. I doubt the oil will bother the yeast.

MyQul · Sep 27, 2015

Doesn't the oil ****** head retention? Thats why you need to get rid of oil when using cocoa/chocolate/cocoa nibs?

clibit · Sep 27, 2015

Yeah probably but why not wait til fermentation is over and get rid of the oil at bottling time?

MyQul · Sep 27, 2015

I agree (didn't read the last few threads in the post

). I'd only rack from under it now if I had another reason for racking to a secondary. As you say can't see it causing the fermentation any harm. After all hop oils sit on the top of many a brew without causing harm and it's just more work/one more step

davejhs · Sep 27, 2015

Will leave until its finished and then siphon into another FV.
Fermentation is ok now with airlock bubbling quite regular.
So the oil has not affected the yeast.

davejhs · Oct 7, 2015

Have bottled tonite.
Siphoned into bottling bucket,most of the oil has disappeared from when it first started to ferment.
May have been eaten up by the yeast.
Very tasty not sure how much flavour is the nuts but cant wait till its conditioned.
Ended up at 4.6.
May add various nuts to a few more brews.

clibit · Oct 7, 2015

Really looking forward to hearing how it turns out!

davejhs · Oct 22, 2015

Has been bottled two weeks.
Tried one last nite realy nice and can only get better.
Head was ok and lasted to bottom of glass so oil from nuts was ok.
Will have to brew again with nuts as it is realy smooth and as good as if not better than a lot of pub milds.
As clibit descibed it FABULOUS.

clibit · Oct 22, 2015

Brilliant job that Dave, looks fantastic! Darker than mine, maybe we used different crystal malts.

How much nut flavour?

davejhs · Oct 22, 2015

Not sure how much flavour is from nuts but is realy tasty and smooth.
May brew a small quantity again and split the wort,adding nuts to half and compare when finished.

MyQul · Oct 22, 2015

Lovely! Gawd, I love a good supping mild.

davejhs · Oct 22, 2015

May rebrew my first AG recipe and add nuts and see how it compares to original.
Still have a couple of bottles left.

Covrich · Oct 22, 2015

Looks good, I never really tried mild before but we took the kids down the 7th Valley railway steam trains and I tried a Hobsons CHampion Mild.. I was surprised, smooth malty and a touch sweet/ chocolaty. Not sure how good a Mild that is but it certainly got me curious enough Will certainly be interested in making one.

Simcoe Mild

Help Support The Homebrew Forum:

Senior Member

Active Member

Senior Member

Active Member

Senior Member

Active Member

Active Member

Senior Member

Chairman of the Bored

Senior Member

Chairman of the Bored

Active Member

Active Member

Senior Member

Active Member

Senior Member

Active Member

Chairman of the Bored

Active Member

Geek

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!