Search results

No I didn't try the one that came with it. The below pic is the same as the one I have and as you can see its not as fine, it will also need a straight 1/2 bsp connector to connect to the back of the tap. Or leave it off and filter through a bag into the fermenter? Cheers.

Welcome Pete. Having moved to AG from kits only recently the difference is night and day. I'm just supping a pub quality Peroni Clone and it is stunning.

My bazooka came from Ali Express for about a tenner similar on ebay. I put all strike water in kettle heated and then slowly doughed in which was fine just stir well. Yes hop bag will be fine. I would say try hop filter if you are using a hop sock should be fine and you might be OK with the...

All correct. The top plate will stop grain going down the overflow if it struggles to pass through the grain bed, it will also allow the sparge and pumped wort to distribute evenly. In my first brew with this efficiency was poor so worth leaving off if you can so you can aggitate the grains...

Yes but the output was a bit close to the edge of the kettle for my liking to let water spray off lol

The jacket doesn't quite fit I had to cable tie mine together but I'm sure it will stretch. You can make a cooler for £30 at tool station for 10mm copper pipe and 10mm to 15mm compression fitting adapter and two hose pipe tap connectors.

The pump should be fine at 85 degrees and under. I just used my homemade immersion chiller to drop to 85 which took seconds and then set the temperature on the machine. I left the chiller in situ and hung the hop spider on the outside of it. When switching on, the whirlpool pushed the spider...

Think it's a spare for the pump underneath, yes i did get one.

First brew today, trying David Heaths NEIPA with a 30 min boil. My only issue is that my OG was way off should have been 1.066 and ended up being 1.054. I made it up with some DME but as I had the top plate on I didn't work the grains that much which I should have done. Changed the bottom...

Did you get yours from hifi tower?

That's what I will be using to clean mine. For the first go I just brought it up to the boil and gave it a good rinse.

Yes that's like my adapter that I picked up in France for an AC unit. Works fine with the heavy voltage

Did you use a hop spider? I've had the same issue with a different filter and hop pellets. I think the key with T90 is to either bag them or hop spider

Mine has arrived good news. 1. The 35l brewzilla whirlpool arm fits a beauty 2. A brewzilla neoprene jacket fits ish with some help at the back lol see pics. Both were from Jonny at BLT £19 for the arm and £10 for the jacket. I've also stuffed some thermal bubble wrap between jacket and...

Wow shiny. Does it need a plug adapter??

When did you order?

Same

Mine says export scan with a delivery date of Wednesday Which would be good as I fancy a brew day on Friday.

Just wish it would get here!!

I saw somewhere else that there is UK support when someone had issues