Search results

Unless you had a grain bill half of nothing a dough in at 60 and ramp will be too fermentable.

Do you normally check your final beer pH?

Thanks will hunt for S30 spare and will just hold the whole lot in my teeth to keep it secure!!

Thanks, I'm after an adapter to refill the S30 gas cylinder, not a method to use a big cylinder through the S30 filling port. I fitted a bulkhead ball lock gas connector for large CO2 cylinder use but was interested in giving my portable S30 gas bottle a second life. No refilling stations or...

You'll see stratification in the fermenter when the mixing activity of ferment is over. Move your temp probe to the same height/ level as the iSpindels temp sensor. You should find reading more Similar. Note if your ispindel is producing heat which happened once for me with a failed gyro you...

Very interesting thread. I'll add to this thread from a non electronic engineer level, I melted a fotek SSR, purchased a RS replacement that never worked from first use. Refitted the melted one but better positioning, thermal paste and a fan has made it cool. Definitely a user positioning error...

That is best option.

That's when I fine

I use a picnic tap on short beer line to take samples. Also I fill the collection jar with beer / foam after emptying and cleaning. This reduces addition of oxygen each time you drop trub/ yeast.

Should be very very pale, minimal hop, most taste from yeast and highly carbonated. Pretty dry.

Any adapters to fill an S30 cylinder from a big CO2 cylinder? I have the one for sodastream cylinders and that works well.

I've not noticed that the gas ( grey ) fits on the liquid post. The couple of times it's occurred by accident they haven't clicked on fully and have been really difficult to remove. I've fitted a universal on the top of my key keg so that I can do closed transfers and then add gas or .etc my...

Drilling through the side of fridges can be risky. Various tricks to help avoid the cooling lines. Commercial fridges tend to have the condenser lines on the back and you can be carefree with those.

Cable in gap between door, for the sensor cables and heating belt. Seals up fine.

Worth looking at a brewpiless, straightforward use via web browser on phone / computer. You can set control via beer temp or fridge control or set a profile of x days at temp ramp it up or down. Very useful if you aren't on site all the time to push inkbird buttons. It will also integrate the...

Do check the gas ones, I also had one leak through the cap. Fixed it with an O ring but shouldn't be necessary. Beware the universal post as that can take a gas or liquid connector. A useful thing in some situations.

Deep south? up north more like, I'm just above Chichester on the south coast for a few days.

How do you control your fridge? any remote control for temp or can you leave a temperature profile to be worked through?

How do you lager your lager if you rely on ambient?

The floating gravity monitors all have the same problems. The ispindel shows the trend and temp well. An ispindel that had buoyancy below the surface would be challenging to design, especially with the changing density. Plus getting a WiFi signal out from below liquid would be tricky. If you...