Search results

FYI that chiller is now a little cheaper at £43.99 with KS-SA4-LE5 45% off code.

getme5%now

Annoying that maltmiller has switched from the clear to the silver version https://www.themaltmiller.co.uk/product/fermenter-king-junior-10l-pet-pressure-fermenter-keg/ £29.99

If you didn't acidify your sparge water then it could be tannins astringency from the grains. "pH rising at the end of sparge and extracting tannins due to high alkalinity of the sparge water might be the most common fault in craft beer, commercial or home. Once you understand what that...

If you turn off the pump, add the hops, then stir to dissolve them, then they won't clog the pump. It gets blocked when a solid hop pellet goes into the pump. There is a trick to unblock it but it's rather risky. If you use whirlpool arm to get a hop cone then you can transfer using pump, so no...

I'm using the 10L Fermenter Genius and been mostly happy with it except the lid gasket is difficult to fit and needs to be dipped in boiling water to be made more malleable. It needs to be fitted perfectly in the lid recess otherwise not air tight. Also the stock airlock is too small so I...

The is one is for mashing, I.e temp timers over minutes not days. i got a 308s with detachable thermometer suitable for fermenting via eBay "best offer" £22 (my first offer was 20 and they countered with 22) https://www.ebay.co.uk/itm/222458695470 Others might like the Wi-Fi version for remote...

I planned to do no sparge and started with 15L. However after I lifted the malt pipe and it drained I tasted the grains and I was a bit annoyed how sweet they still tasted (I even had done a mash out) so I quickly dechlorinated 1L of sparge water and used that. Pre-boil was about 12-13L and I...

I'd say whirl-pooling is an advanced debris filtering technique that removes the need for a hop spider or hop bazooka. I had a really enjoyable first brew today with mine, still can't believe we got such a great deal. I took a gamble and didn't install the bazooka a filter on the tap outlet and...

The tubing I ordered for the tap arrived, very snug fit on the tap, easyish to fit on just takes a couple seconds to wiggle it on. FYI the tap hose connector measures 11.5mm OD with the calipers so I went with 10mm ID. I believe it's designed for 3\8" tubing which would be 9.5mm which is hard to...

I don't think a spash (splatter) guard will work because the surface area over the inlet is so small it'll just get blocked immiedately. Check out this inlet filter that Brewster Beacon came up with, much larger surface area...

I just went and measured mine and 348mm looks like a good fit. I did however noticed there is a couple mm less space needed to fit past the the bar that the malt pipe hooks on to but it the false bottom is a flexible it could bend past that. The Brewdevil false bottom design probably has taken...

It's 348mm, the size is shown on this false bottom for the Brewdevil version. You would need to sink it in after the mash so it doesn't prevent recirculation of grain particles that fall through the bottom of malt pipe.

£15.49 at Screwfix: DIMPLEX ECOT1FT WALL-MOUNTED TUBULAR HEATER 40W 408 X 81MM Has anyone seen one with a flat power cable?

That's a shame I guess someone with some extra time on their hands this morning alerted them to the mistake or maybe someone tried to order a ton of them lol! Anyway it was fun while it lasted!

Maltmiller have the whirlpool arm on sale £9.99 down from £18 I've just ordered it with some ingredients for the next few brews. Fyi it's 355m which is shorter than the Brewzilla version at 520mm This user thought it was too short but will see...

Yeh it would be useful to others if @Eight Ace edited the first post to include the coupon code. It's KS-SA2-LE5 enter it on the basket page and click redeem and it knocks 25% off making it £176.99

I had this problem and the bitterness taste was tannins extracted from the grains during either the mash, sparge or both. Once I used acid to reduce the tap water Ph from 8-9 out my tap to around 5-6 the issue was resolved. Yeast somehow makes these tannins taste worse. You can make the beer...

Thanks for all the great reviews, I decided to join the party and ordered one today. Seems very strange to me that before applying the coupon code the copper colour is already cheaper at £235.99 vs £339.99 for the silver given the copper looks nicer and more unique compared to the countless...

I tried that with the basket open in 2 tabs and then enter each code in each tab, it fails with "Combination with vouchers of other series is not allowed."