Search results

The Homebrew Forum

Help Support The Homebrew Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Robobrew pump blocked

    @HarryFlatters what is the barb size? 8mm or 10mm? I found these on eBay https://www.ebay.co.uk/itm/UK-Brass-90-Degree-BSP-Male-Female-Elbow-Barbed-Hose-Tail-Pipe-Air-Gas-Fittings/223040226598 Would you point which one is the correct - fitting: female, BSP thread size 1/2, but what about hose...
  2. M

    Soda Stream to Gas MK4 Regulator connector

    Thanks, because I am trying to find a connector with a stopping valve, but it is not that important:)
  3. M

    Soda Stream to Gas MK4 Regulator connector

    I can confirm that T21-4 to W21.8-14 - is the correct standard for EU/UK bottles. This picture bellow is my case. But do you know if CGA320 - is the same as T21-4
  4. M

    Robobrew pump blocked

    Well, I already bought it:) I will try my next brew with it:) If it clogs I will try to do same thing as you did:) Thanks for the idea and the picture!
  5. M

    Robobrew pump blocked

    I bought this, which you put at the hole at the bottom where pump sucks - https://www.angelhomebrew.co.uk/en/brewdevil-accessories/318-brew-devil-hop-filter.html I believe it will prevent clogging with crushed grain. p.s. I am with BrewMonok Magnus and that filter fits perfectly.
  6. M

    Soda Stream to Gas MK4 Regulator connector

    Guys, I bought a lot of stuff, I am waiting and I will see if everything fits:) I bought to sodastream adaprots from ALiExpress with controlling valves, but I also bought a mini regulator with a soda stream adaptor:) Will let you know once everything is here and will post close pictures to the...
  7. M

    Soda Stream to Gas MK4 Regulator connector

    Thanks for your detailed explanations! I will try to fix the Sodastream in order not to fall over, but I am also considering to buy a small regulator to use it with the smallest gas cylinders if I need to use it on a picnic or to bring at friends apartment. I am brand new to kegging and may...
  8. M

    Soda Stream to Gas MK4 Regulator connector

    Well I purchased some from aliexpress and will see if they will fit once arrived:)
  9. M

    Soda Stream to Gas MK4 Regulator connector

    ^ This is what guys from The MaltMiller told me.
  10. M

    Soda Stream to Gas MK4 Regulator connector

    I got an answer from a seller: The correct one is: W21.8 Female to BSP 5/8" Male You'll need the female thread to take the soda stream bottle and the 5/8 male thread to attach to the regulator.
  11. M

    Soda Stream to Gas MK4 Regulator connector

    Hello guys, What is the right connector from Soda Stream bottle to Dual Pressure MK4 Regulator connector, I found the following on eBay - https://www.ebay.co.uk/itm/UK-Cylinder-Sodastream-Converter-Adapter-For-Aquarium-Fish-Tank-CO2-Regulators/372906293522?hash=item56d2f27912 but they offer...
  12. M

    All in one systems.

    I have a BrewMonk as my micro "brewery" is just 4 sq.m. with the sink, plot and fridges inside, so all in one is the only possibility.
  13. M

    Robobrew pump blocked

    I have a BrewMonk and it was blocked clogged on my first brew, because some of the grains fall outside the inner(mash) body in the main boiling kettle and I suppose they go trough the pump hole and clogged it. Then I removed the outer pipe and used a garden hose with a high pressure to pump...
  14. M

    Swing top bottles - dangerous?

    I have about 100+ swing top bottles, mostly Bernard, and never ever had any problem. Usually when I am bottling let's sat 20+ liters I bottle like 5-10 liters in 1 liter pet, and the other equally between swing tops and capped bottles - PETs are good when travelling, swing tops at home, and...
  15. M

    Plastic or glass bottles

    I left it for a night with really hot water, but the crud was not removed, I found the easiest way is to use some thin bottle brush - the third: But also I have a friend working in a bar and he gives me a lot of bottles so if a bottle has too crud I just don't use it.
  16. M

    Plastic or glass bottles

    If some crud I am trying to remove it before washing machine. These are mainly bottles I got from some bars and they stayed a lot of time unwashed. Some of them goes into trash as it is impossible or pointless to try to wash them. I am only trying to clean perfectly a swing top bottles as I...
  17. M

    Plastic or glass bottles

    My dishwasher has some sticks that prevent plates to hit each other during washing - something like that - https://www.picclickimg.com/d/l400/pict/132913299861_/Bosch-SMV69M01GB-dishwasher-WORKS-BUT-HAS-E09-ERROR.jpg So I put 20 bottles to these sticks and they are perfectly stable and dry in...
  18. M

    Plastic or glass bottles

    I would prefer to use swing tops or PET, but I also bottle with normal bottles and caps to give some beers to friends, as I want to save swings for myself. Yesterday I just found that some **** caps flatted like 5-6 beers form one of my last brews:( Same brew different caps are untouchable, but...
  19. M

    Plastic or glass bottles

    When opened first time it is splitted in two - the top, which is the cap and a small bottom part, like 2 mm, and that's why I am not sure if I need to find a brand new never used cap, or I can still use this?
  20. M

    Plastic or glass bottles

    I think the dishwasher is too hot and plastic bottles would be deformed. However I am washing glass bottles - 20 - in the dishwasher and it is perfect, fast and easy. I am buying plastic bottles 1 liters from a local supplier in Sofia, Bulgaria - 30 euro cents per bottle. Once the bottle is...
Back
Top