Recent content by Weatherman

Sorry, re read the post and saw you literally mentioned this video :) But 2 weeks flash to bang, it’s got to be worth a go, even it you just do 10 litres.

The malt miller have a video where they pressure ferment and do half the batch with a lager yeast and half with a budvar. Fill the Fermentors leave for 2 weeks no temperature control at all and they are really happy with them serve straight from the Fermentor. It’s on my list for the...

Thanks for the tips All went pretty well. The beer is very drinkable now. I have left it connected to the gas to finish carbonation but am pretty pleased with it now.

Right oh, I’ll have a go.

One of these was delivered on Saturday….along with a duo fit beer filling gun thingy. Can’t use the spunding valve control method though if that’s fitted can I? But, I think the Fermentor is under 19l at the minute and I’m going to try kegging some and bottling some this weekend Like I said...

Again, many thanks. I am enjoying the experimentation and just having a good think before connecting/disconnecting etc. I did connect gas to the fermzilla beer out as the spunding valve was on the gas post. Thankfully, I didn’t blow the dip tube off!

Thanks for the confirmation. I had a look on brew father and it’s 10. Something so rounded down. When I transfer to the keg, should I reduce the pressure in the fermzilla or charge the corny to similar and let a little out with the PRV. My current thoughts are reduce to 2psi in the fermzilla...

Thanks for the reply to a rambling post I left the spunding valve open for the first 24 and then set it at 10 psi. I left it for a week and then dumped the trub. The gravity was 1.005 at this point so pretty much done. I removed the collection pot, cleaned and refitted. Then I have cooled to...

Morning all I am using a fermzilla for the first time. I have a pale in it. I realise this isn’t the best beer for this use but, it’s what I had and is simple/low cost I have come to the conclusion through and awful lot of reading that pressure fermenting doesn’t speed it up, it’s the increase...

It’s a fair point. Can I purge it with CO2 prior to opening using a gas in and a prv on the other port?

1110 mm is spot on from bottom of cage to top of hop bong PRV.

Will measure it too. Keglands website has all the dimensions on .pdf dependant on which bits you add on

This a a 6ft larder fridge that was a specific purchase to fit it in!. It’s also the first time ive used the fermzilla or done any kind of pressure fermenting or kegging. I did manage to find a webpage with all the dimensions on but can’t anymore, I can measure it if you would like, I’ll be out...

Thanks. I have a spare 10 litre fermenter that I can use and have ordered ph strips that cover greater range than the brewing ones I have